Programming 89c51 usb applicationmunkák

Szűrő

Legutóbbi kereséseim
Szűrés erre:
Költségvetés
eddig:
eddig:
eddig:
Típus
Készségek
Nyelvek
    A munka állapota
    3,112 programming 89c51 usb application munkát találtunk, az árak pénzneme: EUR
    usb keylogger 4 nap left
    IGAZOLT

    hi I would like similar or same software that usb kyloggers use where I could load on to my own blank usb devices

    €61 (Avg Bid)
    €61 Licitátlag
    4 licitek

    Hello, we are looking for an experienced QT and Android developer to develop a small library to communicate with a USB HID device without requiring a rooted phone. The library should be accessible via QT/C++ and provide functions like: - open - listDevices - write (blocking and nonblocking) - read (blocking and nonblocking) - close We require the library

    €208 (Avg Bid)
    €208 Licitátlag
    9 licitek

    ...and it has both a wireless connection and several USB dongles for 4g connection. I would like to proxy via this machine using the IP and then connect to internet via 4g. It has to be anonymous (should not be detected as proxy), reliable and easy to use (i.e. I can proxy into it using ip:port1 for usb dongle 1, ip:port2 for dongle 2 etc.). I want to

    €643 (Avg Bid)
    €643 Licitátlag
    5 licitek

    ...and it has both a wireless connection and several USB dongles for 4g connection. I would like to proxy via this machine using the IP and then connect to internet via 4g. It has to be anonymous (should not be detected as proxy), reliable and easy to use (i.e. I can proxy into it using ip:port1 for usb dongle 1, ip:port2 for dongle 2 etc.). I want to

    €485 (Avg Bid)
    €485 Licitátlag
    7 licitek

    Spy cables, custom serial cables and m2m

    €18 / hr (Avg Bid)
    €18 / hr Licitátlag
    12 licitek
    Interfaz USB. PIC - PC Véget ért left

    Intercambiar datos entre una PC y un PIC 18F4550

    €903 (Avg Bid)
    €903 Licitátlag
    16 licitek

    We need help to print using android app, print through USB (thermal printer or normal printer). Attaching two print format to be printed

    €13 (Avg Bid)
    €13 Licitátlag
    3 licitek

    ...connect, so I will be using 12 of the CD4021BE's and plenty of 10k Ohm resistors to complete it. NOTE: the Arduino Uno does not support the MidiUSB library; I need to connect via usb, NOT a physical midi jack (in other words I eventually want the Arduino to be recognized by the computer as a native midi device). I'm not doing any complicated matrix for the

    €20 (Avg Bid)
    €20 Licitátlag
    7 licitek

    I want a Tiny Core based usb image that does the following. When the usb is in the system. The system will boot into the usb tiny core linux connect to the network via dhcp connect to openvpn have sshd running with key and on port specified port have support for as many file systems as possible. ext2/3/4, fat(32), ntfs, hfs etc.. have the following

    €124 (Avg Bid)
    €124 Licitátlag
    2 licitek

    Hi, I need a device developed for the Xbox One console that would display a message on the screen when it's connected. The device can be based on Atmel, Arduino, PIC, STM - anything that you consider appropriate. Most important is that it pops the message on the TV screen when it's plugged in. Ready to test and troubleshoot together with you.

    €177 (Avg Bid)
    €177 Licitátlag
    3 licitek

    A simple ionic app which can connect external usb camera and take picture from it.

    €119 (Avg Bid)
    €119 Licitátlag
    5 licitek

    Hello, I'm looking for android webrtc external usb/uvc camera developer. I'll explain the problem that I have simple only trough points 1. I want to use Android WebRtc with external usb/uvc camera. 2. For uvc/usb camera I'm using this example [jelentkezzen be az URL megtekintéséhez] 3. For Android WebRtc I'm using this example [jelentkezzen b...

    €515 (Avg Bid)
    €515 Licitátlag
    12 licitek

    i need to integrate external camera to android app.

    €353 (Avg Bid)
    €353 Licitátlag
    7 licitek

    hallo ich will messgeräte (ph-meter, leitfähigkeitsmessgeräte, titratoren) so programmiert haben, dass ich die daten die sie liefern im internet abrufen kann oder mir automatisch irgendwo speichert, sodass ich diese von unterwegs einsehen kann.

    €379 (Avg Bid)
    €379 Licitátlag
    2 licitek

    I need a function that prints a barcode to a EPSON compatible usb receipt printer using Delphi 2010. I would also like to know how to send the ESC commands through to the printer.

    €35 (Avg Bid)
    €35 Licitátlag
    5 licitek

    I would want a Wifi + BLE + USB to CAN converter hardware developed for a product intended to be used for industrial purpose built on ESP32 platform. The hardware should work from voltages ranging from 6 to 32 volts. It would need to show indications on different status via LED. packaging details etc can be provided individually to the consultant.

    €505 (Avg Bid)
    €505 Licitátlag
    7 licitek

    I need you to develop some software for me. I would like this software to be developed.

    €104 (Avg Bid)
    €104 Licitátlag
    2 licitek

    I am a network security student, im working on a proof-of-concept idea that I will need a silent way to sniff and store all network traffic using a flashdrive. My requirement: A flashdrive image that will silently use wireshark portable to sniff and store all network traffic for 10 minuets. No alerts or prompts.

    €529 (Avg Bid)
    €529 Licitátlag
    5 licitek

    I am a network security student and am trying to do a proof-of-concept for quick, silent, and automatic network sniffing via a usb flashdrive. I want to be able to plug the flash drive in and have it automatically capture all network traffic on the lan for 10 minuets and silently save the capture to the flashdrive. There should be no popups or alerts

    €26 - €221
    €26 - €221
    0 licitek

    I have some problem to boot my laptop(brand is BYONE) from usb. When I choose usb item from the booting menu, nothing is happened. I think there is some BIOS setting issue. I can pay 6 usd for this issue. Thank you!

    €4 / hr (Avg Bid)
    €4 / hr Licitátlag
    14 licitek

    I have some problem to boot my laptop(brand is BYONE) from usb. When I choose usb item from the booting menu, nothing is happened. I think there is some BIOS setting issue. I can pay 6 usd for this issue. Thank you!

    €2 - €7 / hr
    Helyi
    €2 - €7 / hr
    0 licitek

    ...([jelentkezzen be az URL megtekintéséhez], astroberry-diy server / github), der einen Schrittmotor über Raspberry Pi GPIO steuert, zu modifizieren, um stattdessen die USB Schnittstelle zu nutzen. [jelentkezzen be az URL megtekintéséhez]

    €40 / hr (Avg Bid)
    €40 / hr Licitátlag
    1 licitek
    software usb connection Véget ért left

    we make power meter and it has usb connection to pc and data to be display on pc and it should be transfer to excel worrd etc

    €350 (Avg Bid)
    €350 Licitátlag
    4 licitek

    ...projects with the board beaglebone black Rev C. I has installed Linux Debian, wheezy distribution, 3 serial ports enabled; ttyO0, tty01, tty02, it works with a screen adafuit HDMI, USB touch screen, the software is developed with Qt5, so the file system includes a toolchain and packages for cross compiling from windows. Now I am planning to use a waveshare

    €316 (Avg Bid)
    €316 Licitátlag
    10 licitek

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[jelentkezzen be az URL megtekintéséhez] port but doesn't communicate (hangs on host write to board). On Linux, it c...

    €19 / hr (Avg Bid)
    €19 / hr Licitátlag
    1 licitek

    I have firmware in C for a MikroElectronika "PIC Clicker" development board using a PIC18F47J53. It includes MikroE's USB library for CDC (USB RS232 emulation). Works fine on Windows, but on a Mac (e.g. OS-X 10.9.5) it registers a /dev/[jelentkezzen be az URL megtekintéséhez] port but doesn't communicate (hangs on host write to board). On Linux, it c...

    €1282 (Avg Bid)
    €1282 Licitátlag
    9 licitek

    Kernal Driver for windows 10. Kernal D...for windows 10. Kernal Driver receives a message from a USB device. Converts it to look like a message from second USB device. Send message to Application which receives messages from USB Device. Driver is to be used to allow new USb device with new id to communicate with existing Application witten in c#

    €639 (Avg Bid)
    €639 Licitátlag
    9 licitek

    Mini-USB dongle with a mono phono input. The phono input is a 12v trigger input.

    €312 (Avg Bid)
    €312 Licitátlag
    7 licitek

    I need to develop a library to interface an Arduino (UNO R3 or Leo) as USB HID haptic device. While basic USB HID gamepad library for Arduino exists in open source universe, I need one with Force feedback support. So in effect I should be able to program an Arduino so that when connected to a PC it should be read as a HID Gamepad with force feedback

    €867 (Avg Bid)
    €867 Licitátlag
    10 licitek

    I have api on localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access tha...localhost that send hello world message in json. It has been tested on Chrome Postman extension and works. I want to access that JSON data from localhost on real device through USB. Have you done it before?

    €3 / hr (Avg Bid)
    €3 / hr Licitátlag
    3 licitek

    Some years ago, I started a project to build a USB Audio DAC to connect to a computer and listen to music. The DACs are based in Arduino and WM8741 chips. I also made an Android APP to control the DAC with Arduino Bluetooth connection, the problem is I do not have time to evolve the project, and I need qualified help.

    €95 (Avg Bid)
    €95 Licitátlag
    10 licitek

    For my 3amp, 18w ultra fast smart phone charger with single USB slot, I want mass production of it for minimum 1000 quantities. And for reference here I have attached sample images with dimension and my aim is to go for readily available mold with nearly same dimension and shape so as to save cost for die making process involved in it. So in order to

    €91 (Avg Bid)
    €91 Licitátlag
    15 licitek

    We are building an IOT product (hardware) which would handshake with an android / windows runtime (application) via BLE, WiFi, USB (one of them at a time). After connecting with one or more devices, the runtime would send requests to these nodes retrieving data from a database. It would also display data based on the response received from the nodes

    €319 (Avg Bid)
    €319 Licitátlag
    8 licitek

    I would want a firmware developed on ESP 32 that would have Wifi, BLE, USB communication to external environment (Phone / Cloud) and would communicate with a CAN enabled system such as a vehicle on the other side. The firmware should also have mesh network enabled. Can discuss more details on the project personally. Would prefer a developer from the

    €1042 (Avg Bid)
    €1042 Licitátlag
    10 licitek

    I want to build a system by which when user uploading pdf files to serve(PHP and Mysql) using form ...uploading pdf files to serve(PHP and Mysql) using form submit from browser then before uploading files to serve they should get signed with digital certificate stored in smart card (USB Token). This should work in windows as well as linux environment.

    €267 (Avg Bid)
    €267 Licitátlag
    5 licitek

    For my charger manufacturing business, I need smartphone charger cabinet or enclosure designer and manufacturer and initially I need to get single USB charger cabinet manufactured and material to be used should be of high quality like premium PC materials with its features like heat resistant, fire resistant, drop resistant, corrosion resistant, compact

    €71 (Avg Bid)
    €71 Licitátlag
    26 licitek

    We have built a POS system and we have one element outstanding which is to print a receipt on our EPSON terminal printer locally on USB. We need source code which will first detect the default printer and print a certain document . A tip would be using QZ which can be found on [jelentkezzen be az URL megtekintéséhez]

    €185 (Avg Bid)
    €185 Licitátlag
    5 licitek

    I will supply an APK that was wrote to work on a native android device with NFC reader and i need to be adapt to an Android device that have a USB NFC reader. i will provide the reader drivers from the USB NFC reader.

    €400 (Avg Bid)
    €400 Licitátlag
    9 licitek

    A freelancer is need to write a USB mass media interface for legacy MS-DOS. This should be coded in C++ using the OpenWatcom compiler. The program will need to be written as a 32-bit protected mode executable. Along with the program, a test program should be provided. The test program should also be compiled as a 32-bit protected mode program. The

    €297 (Avg Bid)
    €297 Licitátlag
    6 licitek

    PCIE USB 3.1 and 10 GB Ethernet card with trigger, Galvanic Isolation and drivers. 3D cad drawing a electrical simulations as part of delivery.

    €611 (Avg Bid)
    Titkos
    €611 Licitátlag
    12 licitek

    Looking for a Linux sysadmin who have experience with serial port settings, serial communication. I want to use Neoway M590E GSM/GPRS modem with USB-UART serial converter, looks like everything okay, but I can't communicate with the modem over terminal. I already tested the communication with the modem under Windows, everything fine, working. You need

    €15 (Avg Bid)
    €15 Licitátlag
    7 licitek

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €24 (Avg Bid)
    €24 Licitátlag
    2 licitek
    USB re-director tool. Véget ért left

    Who can help me to build any tool which enables a remote connected remote usb PC to act as if, is connected to my own computer. I want to be sharing my usb software remotely.

    €26 (Avg Bid)
    €26 Licitátlag
    2 licitek
    Remote usb server Véget ért left

    I needed a tool or software which will enable me to remotely share my usb with other remote computer(s). Example, for unlocking purposes

    €26 (Avg Bid)
    €26 Licitátlag
    3 licitek

    ...allow to connect serial devices to systems using a USB interface. Connecting the converter to a PC, you get one extra high-speed RS-232/422/485 ports. It must have the auto-tune baud rate and data format to the RS-485 network (totally compatible with Modbus). The power converter derives from the USB port and doesn’t need any power adapter. It also

    €46 (Avg Bid)
    €46 Licitátlag
    3 licitek

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €39 (Avg Bid)
    €39 Licitátlag
    6 licitek

    Got a project where I need to extend a USB Type C via a circuit board. Require someone to route the schematic and PCB. There are only 2 components, the socket and plug. I have been advised that there is no need for any other components to extend the USB Type C. Using Wurth components 632723300021 and 632712000021. Will require doing it in CircuitMaker

    €68 (Avg Bid)
    €68 Licitátlag
    8 licitek

    There is a led on the cypres fx3 chip board. This function is to turn on the LED by pressing the button on the winform. uvc communication (1.1) version Using the extension unit command guidExtensionCode: {63610682-5070-49AB-B8CC-B3855E8D221D} By sending the extension unit command 0x0D through the above GUID, the LED control Since the maximum value is set to 9, the minimum value is set to 0, ...

    €9 - €26
    €9 - €26
    0 licitek