Find Jobs
Hire Freelancers

LabVIEW Controls Program

$3000-5000 USD

Lezárt
Kiadva ekkor: több mint 5 évvel ezelőtt

$3000-5000 USD

Teljesítéskor fizetve
I work for a company that builds Air Cooled Heat Exchangers. We pressure test all of our units before they leave the plant to ensure they hold pressure without any leaks. To improve safety, we are going to a fully automated test system, which is to be controlled by a DAQ system using a Laptop. I am looking for someone to write me two separate (but very similar) LabView programs for both of the test setups shown in the attached schematics. The LabVIEW program should have a simple interface, in which an operator can set the test pressure and click "Go" and the system will pressurize the unit while recording and displaying in real time, the temperature and pressure of the fluid inside the unit. Any help would be much appreciated. - Harrison
Projektazonosító: 17567184

A projektről

29 ajánlat
Távolról teljesíthető projekt
Aktiválva: 6 évvel ezelőtt

Szeretne pénzt keresni?

A Freelancer oldalán történő árajánlatadás előnyei

Határozzon meg költségvetést és időkeretet
Kapja meg fizetését a munkáért
Vázolja ajánlatát
Ingyen regisztrálhat és adhat árajánlatot munkákra
29 szabadúszó adott átlagosan $3 722 USD összegű árajánlatot erre a munkára
Felhasználó avatár
Hi I am experienced electronics engineer with more than 8 years of experience. I have seen the attached files I have worked previously with Labview too. Please review my profile to see the feedback from my previous employers. I am waiting for your reply to start Regards
$3 000 USD 15 napon belül
4,9 (235 értékelés)
7,9
7,9
Felhasználó avatár
Hello my name is Maria, I would like to work in this project, I’m an engineer with plenty of experience working with Electrical Engineering, Electronics, LabVIEW, PLC & SCADA, Verilog / VHDL, I have made many similar projects, so I am sure I can do a good work for you. Good communication with my clients it is a top priority for me. If you have any doubt or want to see more of my work I’ll be here. Contact me for more info.
$3 888 USD 30 napon belül
4,9 (18 értékelés)
6,6
6,6
Felhasználó avatár
I am a Certified Labview Associated Developer with more than nine years of experience. During my career I have written a number of automated test system. I have excellent experience with DAQ card applications. Please contact me if you are interested to share more details. Thanks.
$3 333 USD 30 napon belül
5,0 (66 értékelés)
6,5
6,5
Felhasználó avatár
Hi, I hope you are doing well. I have expertise in Labview based Programming. I have worked with myDAQ interface, Digital IO and Analog IO, myRIO hardware. I have reviewed your project details and would like to discuss the program flow in more details. Please send me message for further discussion. Looking Forward, Khawaja
$4 444 USD 30 napon belül
4,8 (60 értékelés)
6,6
6,6
Felhasználó avatár
Hello, We are a Turkey based company and we offer special purpose machine manufacturing and automation solutions to our customers. We can create you a SCADA system to control your tests. Please contact me to talk more about your project. Best Regards Ates Gokdemir
$4 444 USD 30 napon belül
5,0 (5 értékelés)
5,8
5,8
Felhasználó avatár
Dear, Sir. I'm Labview expert. I have many experience on your project. If you hire me, your project will be complete great successfully during shortest time.
$5 000 USD 30 napon belül
5,0 (2 értékelés)
4,9
4,9
Felhasználó avatár
Hello, I am an experienced control system engineer (8 years) and I hold a BSc in control system and currently doing a PhD in robotics. I have done many past projects related to DAQ, PLC, SCADA and other industrial automation & monitoring projects. Please hire me, I can help you to finish your project. Thanks
$4 000 USD 20 napon belül
5,0 (6 értékelés)
4,7
4,7
Felhasználó avatár
Dear Sir I am an Electrical Engineer and I have experience of 12 years in LabVIEW based automated solutions. I can do this job in just two weeks and according to your specifications. I also provide long term support to my clients. Kindly discuss the details with me over chat. Looking forward to have a long term relationship. Best Regards Muhammad Shahid
$3 000 USD 15 napon belül
5,0 (1 értékelés)
4,6
4,6
Felhasználó avatár
Hello Harrison, I am CLD certified Labview developer with over 11 years daily experience in tests automation. Please check my profile here and if you would like to know more about my experience, invite me to a meeting for clarifications. Best regards, Nicolae
$5 000 USD 40 napon belül
4,9 (12 értékelés)
4,4
4,4
Felhasználó avatár
I have previously worked with LabView. Could you please provide more information on your system?What is the interface between the pc and the daq? Could you specify the daq in your system? best regards,
$3 500 USD 30 napon belül
5,0 (5 értékelés)
3,8
3,8
Felhasználó avatár
Hello Sir I'm familiar with Lab View as you see at my profile .I built many DAQ systems for machines & air conditions and heating system and boat automated system So I'll be happy to add your project to them ,But I have many questions 1*do you built a communication protocol between your unit or not yet 2*If you do it ,what it's type "Serial_UART_USB" OR "TCP IP _ETHERNET" 3*I can built a communication board between your unit and the laptop lab view Is that available or not 4*The lab view GUI have you specific it or you need it to be like the picture you upload the output file I'll give to you,will be a exe file so you can run your GUI control by any pc or laptop without any needed to lab view source code I have proficiency in following software tools: Electrical circuit design Labview DAQ with electrical interface Arduino IDE pcb design microcontroller programming ,interface plc programming scada system design Siemens S7 programming Electrical circuit simulation thermal control system building circuit (low energy control) bluetooth NodeMCU programming IOT (internet of things) Mplab(x) IDE micro C IDE PCB manufacturing Feel free to contact me for more discuss thanks Mohamed
$3 111 USD 10 napon belül
3,9 (15 értékelés)
5,0
5,0
Felhasználó avatár
I am electrical engineer .I have lot of experience working with various employers globally. Can I do Circuit Analysis and design, Power System Analysis,DC/AC machines Electrical Distribution , translation and technical writer .i use Autocad,Matlab,Revit,Plc simulator, Pspice,word and excel.
$3 000 USD 10 napon belül
4,8 (20 értékelés)
3,6
3,6
Felhasználó avatár
.......................................................................................................................................................
$4 444 USD 30 napon belül
5,0 (3 értékelés)
3,7
3,7
Felhasználó avatár
Hello, I would like to help with your project, I'm also open for longer cooperation. I'm a Certified LabVIEW & TestStand Architect with a few years of experience in the test & measurement industry (worked also for National Instruments) working e.g. on projects that are similar to yours. Feel free to ask any question. Best Regards, Mateusz Owczarek
$3 000 USD 20 napon belül
5,0 (2 értékelés)
3,7
3,7
Felhasználó avatár
I’ve extensive experience in software development using LabVIEW. Also I’m certified LabVIEW architect. This project requires interlocks and safety features as well, which I can include in the software development. I can complete this project in even lesser cost that what I’ve bid here. Let me know if you’re interested and you can connect to me on my gmail using same id as of freelancers (which is ashwani18in).
$3 000 USD 10 napon belül
5,0 (1 értékelés)
2,7
2,7
Felhasználó avatár
Hello I will help you for done this task perfectly. looking forward. Thanks
$4 444 USD 30 napon belül
1,2 (3 értékelés)
3,9
3,9
Felhasználó avatár
i am a working project engineer in field of plc,hmi and scada from past 5 years and having field experience in process automation and industrial automation
$4 444 USD 30 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
Hi, I'm a project manager for Swiss company that specializes in Tannery automation. I have experience with planing and executing similar projects, in the office and on filed as well. I want to try different fields, that is why I'm here. Looking forward working with you! Best regards, Uros
$5 000 USD 30 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
Hi, we are a team of professionals in the area you are looking for, our team is made up of university professors from the different areas of knowledge, including Mathematics, Electrical Engineering, Mechanics, Automation and Control. We have experience in the development of projects with LabView and data acquisition systems (DAQ) using a laptop. We have skills and knowledge in LabView and have made interesting projects with data acquisition systems, using National Instruments and other data capture technologies as microcontrollers. We can also help you with the technical report of the project. For us it would be a challenge, for you a great opportunity to develop an excellent project. Communicate with us and start working. Greetings. !!!
$3 000 USD 20 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
Hello, My name is vlad and I can help you to accomplish this. I have experience with labview and i have made many application so far. Please contact me.
$3 000 USD 30 napon belül
0,0 (0 értékelés)
0,0
0,0

Az ügyfélről

UNITED STATES zászlója
United States
0,0
0
Tagság kezdete: aug. 13, 2018

Ügyfél-hitelesítés

Köszönjük! E-mailben elküldtük a linket, melyen átveheti ajándék egyenlegét.
E-mailje elküldése során valami hiba történt. Kérjük, próbálja újra.
Regisztrált Felhasználók Összes Közzétett Munka
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Előnézet betöltése
Hozzáférést adott a helymeghatározáshoz.
Belépési munkamenete lejárt, és kijelentkeztettük. Kérjük, lépjen be újra.