Find Jobs
Hire Freelancers

adaptive cruise control using arduino on simulink

$30-250 CAD

Lezárt
Kiadva ekkor: majdnem 3 évvel ezelőtt

$30-250 CAD

Teljesítéskor fizetve
Adaptive Cruise Control Objective Use Simulink environment to develop and implement an adaptive cruise control system for vehicles that automatically adjusts the vehicle speed to maintain a safe distance from vehicles ahead. Hardware Arduino uno x 1, button x 5, distance sensor x 1, 4 digit 7-segment anode display x 1 Description Implement an adaptive cruise control system with five buttons of (1) Set_speed, (2) Adaptive_speed, (3) Cancel, (4) Increase_speed, and (5) Decrease_speed. When the system is initialized, the display shows the initial speed of 0. 1. When the Increase_speed button is pressed, the speed increases and when the Decrease_speed button is pressed the speed decreases however without pressing the Set_speed button the speed will not remain constant and it changes slowly over time. 2. When the Set_speed button is pressed the system enters the cruise control mode where the speed is held constant. In this mode, the Increase_speed button and the Decrease_speed button are still functional and can be used to change the Set_speed. If the Cancel button is pressed, the system quits the cruise control mode where the speed decreases slowly. 3. If the Adaptive_speed button is pressed, the speed is set and held constant until a vehicle shows up at the front or an object is detected where the speed automatically decreases. When the road becomes clear, the speed increases to reach the set speed again. In the adaptive cruise control mode, the display has to blink to differentiate this mode from the cruise mode. In this mode, the Increase_speed button and the Decrease_speed button do not function but the Cancel button can still be used to quit the adaptive cruise mode. If the Cancel button is pressed, the display stops blinking and the vehicle speed begins to slow down. Test procedure The implemented project will be fully tested to ensure that the project objectives are met. A sample test may include the following steps. 1. When the system is initialized, the display system shows: 0 2. Press the Increase_speed button to increase the speed to over 40 and then release the button, the speed has to slow down. 3. Press the Decrease_speed button to decrease the speed until the speed reaches 0. 4. Press the Increase_speed button to increase the speed to about 20, press the Set_speed button, and then press the Increase_speed button and the Decrease_speed button to change the speed. Press the Cancel button to quit the cruise control mode. 5. Press the Increase_speed button to increase the speed to about 30 and then press the Set_speed button to lock the speed. Press the Adaptive_speed button; use a model car to trigger the distance sensor and watch that the speed decreases. Remove the model car and watch that the speed increases. Press the Increase_speed, the Decrease_speed, and the Cancel buttons to verify that they function according to the project description.
Projektazonosító: 30486575

A projektről

6 ajánlat
Távolról teljesíthető projekt
Aktiválva: 3 évvel ezelőtt

Szeretne pénzt keresni?

A Freelancer oldalán történő árajánlatadás előnyei

Határozzon meg költségvetést és időkeretet
Kapja meg fizetését a munkáért
Vázolja ajánlatát
Ingyen regisztrálhat és adhat árajánlatot munkákra
6 szabadúszó adott átlagosan $125 CAD összegű árajánlatot erre a munkára
Felhasználó avatár
MASTERS IN ELECTRICAL ENGINEERING EXPERT WHEN DEALING WITH ELECTRONICS AND VERILOG HELLO DEAR CLIENT I have gone through your project details and the work is DOABLE since its within my area of EXPERTISE.I will tackle are required guideline to deliver desired goal Please consider my bid. THANKS
$140 CAD 3 napon belül
5,0 (36 értékelés)
5,4
5,4
Felhasználó avatár
Hi, employer. Regarding your job success as mine, feel that I am a potentailly right suited candidate for your job requirements. Having more than 5 years experience in the design and development of Embeded system, Arduino, RF, Digital integrated circuits using varius tools and programs I have expertised in the following. - Arduino, Arm, FPGA, Orcad, LTspice - Multisim, Logisim, Electric VLSI, Microwind, ISIS Proteus, CST Microwave - Digital signal processing, Digital image processing I will never let you down provided that you and me build a good rapport. Wish to be part of your success with my own knowledge and error prone code base. Thanks for your consideration. Uros.
$240 CAD 7 napon belül
4,8 (5 értékelés)
3,5
3,5
Felhasználó avatár
hello I have 5 years experience with dealing with embedded system. where i also can deliver in matlab simulink. discuss with me for further details of the project
$167 CAD 7 napon belül
5,0 (1 értékelés)
2,4
2,4
Felhasználó avatár
adaptive cruise control using arduino on simulink Since 2012, almost from 8 years I am managing academic writing tasks successfully. I am working with my friends from different backgrounds, it means I can manage wide range of projects like; Engineering, Business, Arts, Computer Sciences, Medical Sciences, Mathematics and Statistics. Now I am here on freelancer.com to serve my clients with masterpiece against very REASONABLE PRICES. I can help you with your Online Exams, Quizzes, Summaries, Research Papers, Reports and Dissertations and ETC. I provide FREE Turnitin reports and countless revisions to my clients. I PROMISE you 100% SUCCESS. For samples, visit my profile: https://www.freelancer.com/u/FineIdeas
$30 CAD 1 napon belül
5,0 (1 értékelés)
1,0
1,0
Felhasználó avatár
Hello! Your project is very wonderful. I have good experience in your project. I am an Electrical Engineer with specialization in Electrical Engineering, Circuit Design, PCB Layout, Microcontroller and Electronics. I have high proficiency in Electrical Engineering, HVAC, LTE system model, I would love to discuss this project with you and meet your exact requirements. I am confident I can provide you with top-notch materials that will fit your needs. Once you share the project, I will have a look & confirm if I can do it. Thanks for giving opportunity #Looking for an experienced electrical engineer.
$30 CAD 1 napon belül
0,0 (0 értékelés)
0,0
0,0

Az ügyfélről

CANADA zászlója
Mississauga, Canada
0,0
0
Tagság kezdete: jún. 10, 2021

Ügyfél-hitelesítés

Köszönjük! E-mailben elküldtük a linket, melyen átveheti ajándék egyenlegét.
E-mailje elküldése során valami hiba történt. Kérjük, próbálja újra.
Regisztrált Felhasználók Összes Közzétett Munka
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Előnézet betöltése
Hozzáférést adott a helymeghatározáshoz.
Belépési munkamenete lejárt, és kijelentkeztettük. Kérjük, lépjen be újra.