Find Jobs
Hire Freelancers

Delta PLC motor tuning

€12-18 EUR / hour

Lezárt
Kiadva ekkor: több mint 4 évvel ezelőtt

€12-18 EUR / hour

Our production line is running with a asynchronous/induction motor that has a spees variation from about 2% (2000rpm +/-2%). As this has a impact to our product quality we want to improve it and lokking for a skilled Frelancer. Motor dirve: DELTA VFD PLC: Delta DVP-ES2 Programming: Delat ISP Soft Electrilac dragramms well provided as you need it. We need to implement a rev counter to the motor as this is not existing. You have to implement the rev counter to the programm as well the programming for the acurency of the motor. Aslo we need you support by connecting the rev counter to the right position at the DELTA VFD. Rev counter is not ordered yet as we are open to any you need to do this job.
Projektazonosító: 20323933

A projektről

12 ajánlat
Távolról teljesíthető projekt
Aktiválva: 5 évvel ezelőtt

Szeretne pénzt keresni?

A Freelancer oldalán történő árajánlatadás előnyei

Határozzon meg költségvetést és időkeretet
Kapja meg fizetését a munkáért
Vázolja ajánlatát
Ingyen regisztrálhat és adhat árajánlatot munkákra
12 szabadúszó adott átlagosan €22 EUR/óra összegű árajánlatot erre a munkára
Felhasználó avatár
Professional Eplan electric p8 user. Electrical engineering. Project management. PLC programmer. Scada designer
€27 EUR 40 napon belül
4,9 (15 értékelés)
6,4
6,4
Felhasználó avatár
I have experience with PLC and VFD I could help you with such task . Tell me more about the device which will be driven by the motor
€23 EUR 40 napon belül
5,0 (42 értékelés)
6,1
6,1
Felhasználó avatár
Am full-time freelancer expert in Electrical & Electronic Circuit Designing & Simulation, PCB Designing, Consultancy of different types of Electrical & Electronic Problem and Languages: C/C++ Coding IDE: keil uvision, Eclipse IDE, Arduino IDE, Avr Studio. Microprocessor / Microcontrollers: 8051, 8086, ATMEGA, AVR, ATSAM3X8E,STM32,PIC Open Source Micro controllers Platforms: Arduino Uno, Arduino Nano, Arduino Due, STM32 Nucleo board. Experience in managing all phases of electronic product manufacturing and assembly Experience in board-level Testing, Debugging, Test Reports, Test Plans. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. I am always determined to deliver projects to freelancer clients before meeting the deadline with 100% satisfaction & loyalty. I would love to discuss this project with you and meet your exact requirements you with top-notch materials that will fit your needs. I pride my work on being professional, of the highest quality and always delivered on time. you can hire me directly through this link https://www.freelancer.com/u/prefectworld
€12 EUR 2 napon belül
4,8 (31 értékelés)
5,5
5,5
Felhasználó avatár
Hello. As I am a senior Electrical Engineering developer ,I am so interested in your project. I have plenty of experience in PLC development. Also I am excellent Microcontroller programmer and PCB Designer. Especially, I have the plenty of experience in the process automation. I think I can give you the more information for the accuracy of motor as well as the good program although I am new freelancer. I ensure the best quality of your project and to keep your deadline. Please contact me kindly and let us discuss in more detail. Working with me, you will have a good experience and good friend and save more time and money. Best regards!
€15 EUR 40 napon belül
5,0 (2 értékelés)
3,3
3,3
Felhasználó avatár
Hi there, my name is Pedro Reynoso, I'm a Mechatronics Engineer and I've been working in the automotive industry for more than 9 years now, I've worked as maintenance and controls engineer and my current position is Sr. Controls Engineer in an USA founded company who work for GM, Chrysler and other companies, my main duties are implement new hardware (sensors, scanners, motors, HMIs, etc) and develop all the code needed to improve the production process and to reduce the possible faults. I mainly work with TIA portal V14 and Studio5000 V28 and V29 (This is the software I have installed but I have no problems to work with the delta ISPSoft which I'm already downloading) I'm getting familiar with the equipment you have installed but I need to know which is the speed accuracy you are expecting (in your video you have a variation of about 10% because the measured speed is 2200 rpm), I need to work with reachable limits, without problems I can develop the program for you and if you provide me the electrical diagrams I also can deliver to you the modified ones to make your installation easier. Please contact me to chat about the target speed accuracy (2000 +/- X rpm) and the time you have to finish the project. Also if you have another question feel free to write me.
€15 EUR 20 napon belül
5,0 (2 értékelés)
0,6
0,6
Felhasználó avatár
Hello Good Day, I am masood, with vast experience on Automation related project. In Pakistan, i am the sole distributor of delta PLC, so this project is nothing in front of me. if you need any demo kindly contact with me.
€18 EUR 2 napon belül
5,0 (1 értékelés)
0,2
0,2
Felhasználó avatár
regards. I have read the information you provide and if the rpm affects the process so much, the solutions can be: 1. Install an encoder on the back of the motor and take it to the VFD or PLC. This solution will be effective depending on the response time that the systems must have as a function of the speed of operation of the production line. 2. install a servo system and operate it in speed mode and although the implementation cost of this application is higher than that of the induction motor and VFD but believe me it is worth it since the accuracy is very high and we can have additional feedback. I would like us to talk so you can tell me more details of the process. I currently integrate solutions with Delta, Simens and in some cases AB. For me it would be a pleasure to help solve the problem
€88 EUR 48 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
Have experience PLC programming developing CNCs along with working on my own devices for desertion, this project serves as an excellent outlet for my teachnical resources, in need of cash. Relevant Skills and Experience Have experience in PLC programming in CNCs. Used to making devices using PSoC 5 involving embedded systems and easily trouble shooting by condensing problem into shorter obstacles
€12 EUR 10 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
Hi, i am an automation engineer with more the 10 years experience handling different PLC, VFD, HMI, sensors and many other product. i have read you project and i can definitely help you improving you production line process. Please inbox me to discuses technical aspect of this project.
€12 EUR 40 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
i have years as engineer autumation making projetc for industry automotive. i can help you with develomet electrical drawing (eplan IEC), develomet program of PLC, HMI and devices (AB, siemens, DELTA, OMNRON and labview) and in section devices for you project. your preject is possible but if you need more exactitud in the motor i recomed change motor for a servo and planetary gearbox. if this isnot posible i can help you in section the best devices for you project.
€15 EUR 40 napon belül
0,0 (0 értékelés)
0,0
0,0
Felhasználó avatár
Mobile : 00966-567842961 Whatsapp : 00966-567842961 PLC skills -plc hardware &software installing -plc simenes s7 200 software + hardware - plc simenes s7 300-400 software + hardware - plc alenbradly software + hardware -plc Mitsubishi software + hardware -plc logo comfort Scada skills - Scada win cc - Scada cimblcti Inverters skills -Inerter ABB Ac-dc -Inverter simenes Ac-dc -Inverter Eurotherm Ac-dc -Inverter Hitachi -Inerter parker HMI & Driver skills - Wincc flexible 2008 “ hmi” - Simotion software “simenes” - Drive monitor “simenes” - Starter “simenes” - DSELite Eurotherm inverter software Win app programing skills - Microsoft vb6 - Microsoft vb.net 2008-2010-2012-2013 - Microsoft sql server 2008 -2016 - Data base create- and forms design Manufatories skills - Wire drawing MSC - Glavaznition MCS -Cable MCs -Plastic machine injection - Plastic pipe line Stretch film machine Oil process MCS Package MCS -Filling machine
€13 EUR 40 napon belül
0,0 (0 értékelés)
0,0
0,0

Az ügyfélről

GERMANY zászlója
Menden, Germany
4,6
6
Fizetési mód hitelesítve
Tagság kezdete: aug. 16, 2017

Ügyfél-hitelesítés

Köszönjük! E-mailben elküldtük a linket, melyen átveheti ajándék egyenlegét.
E-mailje elküldése során valami hiba történt. Kérjük, próbálja újra.
Regisztrált Felhasználók Összes Közzétett Munka
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Előnézet betöltése
Hozzáférést adott a helymeghatározáshoz.
Belépési munkamenete lejárt, és kijelentkeztettük. Kérjük, lépjen be újra.