CFD on a Bunnings Store

Hi Greetings! I am a Mechanical with expertise in CFD. I can use both SolidWorks and ANSYS Fluent for CFD. I have done projects that include CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. Given my experience of CFD projects, I believe I am the right person for this project. For this project, I will use SolidWorks for 3d Modelling and for CFD I will use ANSYS Fluent. Along with CAD and analysis files, I will provide a rich technical report explaining the results and steps involved. Kindly contact me to discuss further. Regards,

Hi there, I am an Aerospace Engineer with MS in Aerospace CFD (Computational Fluid Dynamics). I have an experience of 3 years working with Government and private organizations. I have studied Turbomachinery, Aero Vehicle Design and Computational Fluid Dynamics as my core in MS program and have successfully completed several projects related to CFD and turbomachinery. Few examples are "Design and analysis of centrifugal Compressor and high pressure turbine for a turbofan engine", "Analysis of first stage of turbine exposed to UHTs", "Design and analysis of fan Compressor" and several other projects. All these projects are done in ANSYS with ICEM CFD as the meshing tool while Fluent as the solver. I have also formulated generic MATLAB and FORTRAN codes for AVD of different aircrafts and conduction, convection, diffusion, advection and convection-diffusion problems which involve solving heat transfer problems by incorporating efficient numerical techniques. I have also been working on ANSYS Fluent and CFX for past three years and have good experience working with the simulations of turbomachinery. All the projects are in my portfolio. I can share with you the list of projects I have completed and you can have a look at my portfolio as well for further details. Feel free to contact me any time. Looking forward to working with you. Thank you!

Hello I am a mechanical and aeronautical engineer with 5 years experience based on CFD in aerospace industry. Currently I am working as a thermal engineer and have solid background on thermal design. Pls send me message via chat for more information. King regards.

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I am also expert in mechanical engineering softwares including Ansys, Fluent, Comsol, CATIA, Solidworks, Abaqus and Inventor. I'm interested in your project. Please send me a message so that we can discuss more. Best regards.

Hello, Hope this message finds you well, I checked your details and I believe that my experience is what you are looking 4. I have been working on similar projects for the past eight years, and I have the essential skills including; Mechanical Engineering Finite Element Analysis 3D Modelling Computational Fluid Dynamics Ansys I will prove to be of great help to you. SEND MESSAGE/CHAT, so that discuss more on the details including budget and deadlines… Please REMEMBER to; Wash your hands frequently, Maintain social distancing, Avoid touching eyes, nose and mouth..., Practice respiratory hygiene, Stay home and if you feel unwell seek medical care early. Regards, BrainCenter Inc

I am CFD engineer with several years of CFD practical experience in similar projects. I would like to make an offer for your project. Let me know if you are interested. Kind Regards, F. Saric

Good day I am a mechanical design Engineer with work experience in computer aided design and computer aided engineering I will do your "Bunnings" CFD simulation by performing: -3D CAD modelling of the Bunnings domain using SOLIDWORKS -CFD simulation using discrete particle model to analyze Bunnings system in ANSYS fluent. It'll be a nice time working for you Best Regards,

I will need a stp model in the end from you o do these in ansys CFX like my previous jobs. So you can save your file in STP format and send to me. please let me know if interested.

Hi, Apart from my academic qualifications with B.Sc. in Mechanical Engineering and M.Sc. in Fluid Mechanics (PARIS), I have worked on CFD codes such as elsA (CFD code used by Airbus France), DLR-TAU (CFD code used by German aerospace industry), Gerris, Star CD and Ansys FLUENT. I am currently working on a project to optimise a UAV propeller using low fidelity numerical tools to high fidelity CFD simulations, through my own company, SAVIYURU AEROSPACE. My first project on this freelancing platform is also currently underway, which is also a CFD project. I formed SAVIYURU AEROSPACE primarily to engage in aerospace related aerodynamics and CFD projects, but now we are diversified into all kinds of airflow simulations. I have also worked in the building services industry and designed and over-seen the erection of fire protection and suppression systems, and HVAC systems. So I believe I have the perfect profile for this project. I will use Ansys FLUENT for this project and any geometry modelling will be done in CATIA. We can use your revit model to generate the volume. If required to change these, we can discuss. I can seek the expertise of other engineers through SAVIYURU AEROSPACE if required. I am keeping the milestones and the time frame (if you wish) to be agreed upon later when we have more information on the project. I am new to freelancing on freelancer.com, but NOT to aerodynamics or CFD. Anticipating a positive reply, Thank You

I have checked your job description that we have to conduct a CFD on a Bunnings store. Recently completed same project of CFD and thermal analysis of biomass insulted pot(Check ANSYS files and progress report in portolio) I will share video explanation of process too.! I have noted the velocity boundary conditions for simulation so please share the CAD file, I have conducted analysis on synchronous motors, wind turbines,syvnoius turbines,aeronautical drag,heat exchangers,structural stress,material optimization and toplogy optimizations of aircraft pylon.(Check Portolio for ANSYS Files and Progress Reports). https://www.freelancer.pk/u/adeelaltaf119 I have completed 40+ projects of FEA,CFD, thermal and optimization analysis using ANSYS,star CCM+,fusion360,Solidworks and creo 5.0. To get exposure through my professional soft skills on this platform and get long term relations, i am doing analysis and reports in reasonable price. I am Accredited Mechanical Engineer with a firsthand experience in process piping industry and product analysis industry.I have 2 years+ experience coping with simulation analysis and product design. Feel free to discuss projects anytime in chat.

I have a PhD in Fluid Mechanics from the University of Toronto and am well versed in all computational and analytical software. And I have friends who have doctorates in electrical and civil engineering and computers, and we will help you as a group. Dominant person - catia - Inventor Dynamic analysis with Adams- Static analysis with abaqus and ansys *** Special design of hydraulic, pneumatic and hydraulic circuits 3D -autocad- solidworks -editvideo - and Photoshop Numerical calculations with Matlabe Familiarity with the appropriate element Optimizing and providing industrial advice on mechanisms We hope to be able to cooperate sincerely and professionally with dear friends. Thank you very much

Hi, I am interested in this project. I have 6 years of experience as a CFD Engineer. I had done over 200 Car park ventilation, Building HVAC CFD, Car park fire safety CFD, Building thermal CFD projects, and all types of CFD projects. All projects are done in industrial standards. Please feel free to contact me.

i think i will perform these analysis and explain me brief work and share cad model and details for analysis

Hello, I 'm CFD expert.I can provide the best result of CFD simulation of smoke control system I have a lot of experience in the numerical simulation with Ansys Fluent, CFX, Comsol, Star CCM, Solidworks... . I can simulate all kinds of complicated fluid flow including turbulent flow, heat transfer flow, multiphase flow, discrete phase flow, chemical reaction flow... Especially I have the ability to run numerical simulations with the UDF function in Ansys Fluent. And I can do the parameter analysis and optimization with Ansys Workbench. So I' m sure I can complete your project perfectly.

hello sir, I am able to handle this project. I have done CFD simulation of industrial plant for temperature distribution.

We are a team of Engineers. We understand your order. Please send me a message so that we can discuss it more