3D Renderings needed to illustrate a 40' ISO Shipping Container

3D Renderings needed to illustrate a 40' ISO Shipping Container which has been modified with eight louvered vents and an electrical service panel installed. Four of the louvered vents measure 24" wide by 60" high on one side and four vents measuring 24" by 24" on the opposite side. Vents on both sides are centered at 8', 16', 24' and 32'. The shipping container should be blue color and the louvered vents will be a silver galvanized metal color. Two security cameras should be shown. One camera should be placed at the corner of the opening end and one should be placed on the diagonal corner of the opposite non opening end. One rendering should be shown with one or two doors open. Detail should be shown in the doors, the corrugated steel exterior as well as vent louvers. The renderings will need to show views of all the exposed sides of the modified shipping container on gravel, with some very minimal landscaping (a few small bushes). Two additional renderings, showing different elevations, will be required to illustrate 5 shipping containers which have been placed together, parallel to one another with 10 feet of separation in between each modified shipping container. The ground area will be gravel with only a few small bushes on the perimeter. In the rendering with the five shipping containers, three containers should be blue, one should be red and one should be green. Please see the attachments. Needed ASAP.