Fatigue Analysis of a wind turbine main shaft and creation of an online monitoring tool

£250-750 GBP

Lezárt

Kiadva ekkor:

több mint 6 évvel ezelőtt

£250-750 GBP

Teljesítéskor fizetve

1) A static FEA analysis in ANSYS is required of a wind turbine main shaft to determine suitability of the geometry. The model of the main shaft and the Ultimate Load Cases are provided. Redesign of main shaft (modification to the size of fillets using Solidworks or ANSYS) to be done accordingly until optimal design achieved. Verification of results with manual/empirical hand calculations. 2) Upon verifying a suitable geometry based on ULC, a fatigue analysis thereafter is required in NCode Design Life software. Fatigue load data will be provided. Verification of results with manual/empirical hand calculations. 3) Fatigue damage data corresponding to each load case shall be recorded to allow the creation of a online monitoring tool. The online monitoring tool shall be able to map/match against the fatigue data recorded (from task 2 above) when it is used in real-time. 4) Technical report required to support the above 3 tasks. Report should contain the methodology undertaken with its justification, calculations, results obtained, conclusions. 5) A further section to the report studying the possibility to use the approach taken in this project in automotive, aerospace and naval application.

Engineering

Manufacturing Design

Mechanical Engineering

Solidworks

Technical Writing

Projektazonosító: 14721324

A projektről

16 ajánlat

Távolról teljesíthető projekt

Aktiválva: 7 évvel ezelőtt

Szeretne pénzt keresni?

E-mail cím

A Freelancer oldalán történő árajánlatadás előnyei

Határozzon meg költségvetést és időkeretet

Kapja meg fizetését a munkáért

Vázolja ajánlatát

Ingyen regisztrálhat és adhat árajánlatot munkákra

16 szabadúszó adott átlagosan £485 GBP összegű árajánlatot erre a munkára

@dionline

Hello, I have done my MBA in Marketing and worked for McKinsey as an Advanced Insights Analyst. I have understood your requirements, and ready to commence the project immediately. Relevant Skills and Experience I have written content for around 359 eBooks, 405 Websites, 1346 Blogs & Guest Posts, 354 Case Studies, 510 Ad Campaigns and more. I have also contributed to top international magazines and blogs. Proposed Milestones £425 GBP - Based on Specific Requirements Please suggest the scope of the project (Word limit, Exact Requirements, etc.)

£425 GBP 10 napon belül

4,8

(197 értékelés)

7,4

@Valuesolutions

Hello, how are you? I hope you have a bright day/evening from your side. I have read the details provided, but please contact me so that we can discuss more on the project. Relevant Skills and Experience Engineering, Manufacturing Design, Mechanical Engineering, Solidworks, Technical Writing Proposed Milestones £250 GBP - .

£250 GBP 5 napon belül

4,8

(138 értékelés)

6,8

@omarsheriff94

Hello, here is Omar a mechanical engineer. I noticed your project and I'd like to work on it, it is really very interesting. I possess some experience and knowledge in wind power as well as proficiency in Ansys and Solidworks. Hope to hear from you soon!

£720 GBP 15 napon belül

4,9

(23 értékelés)

5,8

@Deep0001K

Hello I'm Navdeep Kumar, an experienced engineer and designer. I have read the description and find myself able enough to complete it. Relevant Skills and Experience Solidworks, AutoCAD, 3DS Max, Revit, Creo, CATIA Proposed Milestones £255 GBP - As convenient

£255 GBP 10 napon belül

4,8

(97 értékelés)

5,9

@seshupower

A proposal has not yet been provided

£667 GBP 20 napon belül

4,8

(29 értékelés)

5,7

@bchandra1955

Professional engineer with 39 years of design and analysis experience is interested Relevant Skills and Experience Mechanical Design, FEM, CAD, Proposed Milestones £722 GBP - Pls offer work at $55/hr rate Let us discus

£722 GBP 21 napon belül

4,4

(97 értékelés)

6,3

@amybrownthatsit

Hey, I have gone through your project details on this fatigue analysis but its not clear enough. Can you please elaborate the topic a little more? Please feel free to contact me if you would like to see samples or if you have any questions regarding the turnaround time. I will assure the highest level of professionalism along with a plagiarism free high-quality paper. Looking forward to hearing from you. Regards, ***Please ignore the bidding price. I just had to pick a random number. Can place a Proper bid only after knowing the exact requirements. Hope you understand

£250 GBP 10 napon belül

5,0

(23 értékelés)

5,2

@schoudhary1553

Greetings sir, i am an expert freelancer for this job and your 100% satisfaction is assured if you allow me to serve. i can do this Task as per your requirement. Relevant Skills and Experience I have the 5 years of experience with excellent knowledge. please give me a chance to work on your project Proposed Milestones £750 GBP - payment once project delivered

£750 GBP 10 napon belül

4,9

(7 értékelés)

4,1

@skylerphd

Hello friend, welcome with your project. I have checked your requirements on this Fatigue Analysis and confident to deliver a high-quality plag free paper. Please reply to discuss more on your project. Also, provide the required reading materials/instruction sheet, if there is any. **Regular drafts will be provided. Thanks in advance.

£555 GBP 10 napon belül

5,0

(3 értékelés)

3,6

@babunarsim1

Finalise the requirements and carryout iterations on the s/w and document and record findings. in case of any issue report to client and clarify. capture calculations for client Relevant Skills and Experience product design, interaction with FEA TEAM, Tol. stack up, ncode hands on on DAQ system, CATERPILLAR EXP, design environment surrounded life earth mov. test validation exp. Proposed Milestones £100 GBP - understand carry out the static FEA Analysis iterations £100 GBP - carry out fatigue analysis on the model £133 GBP - draft report , finalise and submit

£333 GBP 18 napon belül

4,7

(9 értékelés)

3,5

@NikoKoutsorizof

A proposal has not yet been provided

£418 GBP 15 napon belül

5,0

(3 értékelés)

2,9

@kamraa

A proposal has not yet been provided

£250 GBP 20 napon belül

0,0

(1 értékelés)

0,0

@Ashuaa

Thanks for posting the work in Portal. I would like to initiate this project as this very similar to my profile. I am using ANSYS from part 6 years . Relevant Skills and Experience ANSYS, Design Modeler, Space Claim, Hyper Mesh, Pro-E Proposed Milestones £555 GBP - Ready to take challenge. Would like to performed 100% efficient work. Quality with Time. Please provide input data. includes loads, Boundary conditions. Materiel property Linear/Nonlinear.

£555 GBP 10 napon belül