Poky yoctomunkák

Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 mont...

...work with clients. Requirements/Qualifications: - 5 years of experience in embedded software development, C, C++ - 2+ years of experience with Embedded Linux - Working experience with the firmware layer - Fluency in English - Nice to have: yocto/linux Tasks: -Developing software for “State of the Art” IoT products for DAX listed German companies -Leading technical role, giving input to the software architecture -Product: smart home, new R&D for market release 2024 -Focus on the firmware layer, if wanted support towards the application layer -Yocto/Linux distribution Benefits: - Working on big projects in the German market you can get on your reference list - 100% remote work Start of first project: May 2022 Duration of projects: Between 6 to 12 month...

...documented. 5. XC7Z020-1CLG400C FPGA (or better, from the same series) from the Xilinx lineup is to be used. Verification will be carried out on the Digilent Zybo Z7 Board. Necessary drivers and bring-up to be provided as a set of Yocto packages B. Software/Firmware: 1. Host device for the interface detailed above shall be a BeagleBone Black device (), with the interface provided as a Cape, following the hardware interface specification for said capes 2. Device drivers and full Linux source image shall be provided as a fully integrated Yocto package - this will be bundled with the lower-level firmware and drivers referred to in hardware specification in (A) above 3. All source code shall be extensively documented and provision for both production and debug version

I'm looking for someone to make a raspberry pi 4 yocto recipe for the driver found at this github.

(Only on Full Time Basis : 8 Hours per Day)---->Microprocessor based Board Development and Firmware is done and now application layer need to be developed for MPU requirements. Development will be using C language and Operating System is Yocto Linux. I have not provided MPU chip name as we are OK to train the person if he/she is aware of C programming and Yocto development platform. Since Hardware is available at Pune and Ahmedabad only, we need you to work from either Pune or Ahmedabad location.

Hi, Basically, this issue needs to be resolved: It all starts when I try to follow this tutorial: issue: Reading file would overwrite reserved memory. Failed to load '

We have an ARM based module that will be connected to the Internet via the Ethernet interface(eth0) and we would like to control how WiFi clients(uap0) then access the Internet via eth0. We are restricted on what modules are available as the project has a precompiled Kernel and any changes requires a Kernal compile. Software is ARM based Toradex module iMX8 with Linux Yocto running these modules: -systemd -resolved -iw -connman -hostapd -dnsmasq -dhcpd not compiled into this kernel -iptables WiFi is configured as uap0 Ethernet is eth0 The requirement is to provide the configuration files (, , etc) and scripts necessary to provide the following: -Setup eth0 to be connected to router providing the DHCP and Internet access -Setup the WiFi (uap0) as an access point to

From an existing Yocto version, we need to improve it by adding Bluetooth and CAN communications. The embedded plateform is a SMT32MP157F with a Cortex A7.

Hello! I seek for help in setup of Development Environment (Linux based) for SOMs made by Toradex (iMX6, Tegra T30) for Yocto Linux Embedded and for Torizon layer (over same Yocto). It is required to setup development environment and provide basic step by step on how to run/add/embed/rebuild etc tasks. Simple "Hello World" for OpenGL, GPIO, CAN and LVDS/RGB will be required. Detailed description of the project is provided in attached document. Thank you

Create a Yocto Receipe for Raspberry pi4 with the following Features : Embedded image that automatically launches the Bad Apple example from here : Totalcross Yocto metalayer: Enable support for the pican2 duo board: enable the following : WIFI LAN SSH client Touch screen support Disable the following : Bluetooth

I have some code that is tested and working on a raspberry pi/raspbian, and I am trying to build my own linux with yocto to run the code, but I can't get llvmlight and numba to cross compile. I have been able to compile it natively on a pi running my yocto build. If someone else want's to give it a try, that would be greatly appreciated.

I need go lang programs to run on my raspberry pi. For this I need go lang support to be built with in yocto. The go lang programs need to access an lmdb database. So I need this to be built in as well. At the end a test go lang program should be able to write to the lmdb database and read from the lmdb database.

...thru QSPI flash only. Extra Info: 1. My costumed board is working properly and there is no any HW issue since I'm able to run on it a vxWorks 7 image. 2. I use petalinux 2019.2 version and Vitis 2019.2 3. I use the Xilinx tool: Platform Cable USB II for programming and debug. But please! I’d like to get bids just from a fellows who has a strong knowledge and experience with such a technology: Yocto project, Xilinx boards, petalinux 2019.2 and Platform Cable USB II. If you think you can help me and you are available for this mission in the next few days - I'd like to hear from you. Thanks!...

I need an enclosure that I can 3d print that Looks similar to a rifle scope. square or round. Is two pieces. When closed around the neck of the camera the camera does not move. The yocto board can be mounted to the top half of the enclosure inside of it. 2 holes in the back for the two USB C cables to stick out of. the bottom piece will slide on to a picatinny rail.

We currently have a custom Embedded Linux OS (Yocto) build running on a Toradex iMX6ULL SOM board. The OS was developed to run "bring up" test routines for GPIO and UART peripheral boards. The device tree supplied with the BSP supports a standard 7" display but now we require a dtb for a different 3.5" 320x240 VGA display. The project scope is to create a modified device tree to include a driver for the 3.5" parallel RGB display so that the display renders properly. Depending on the project outcome, there may be significantly more work available.

I am working on zynq 7020, the binaries are running manually. But I need binaries to be autoladed as part of booting.

I have working binaries, the application has to load on board automatically as a part of booting in Yocto. Budget is 1500 to 2500.

We are looking for an Embedded-Linux/DevOps expert to improve our deployment solution for the machine-control software of our 3D-Printers.   Tasks: • Devising a solution for customizing and building a Linux-based...The solution must also conform to open-source license requirements. • Devising an automated solution for deployment and protection of our proprietary software (initial installation and the consequent software updates). • Extending our DevOps Infrastructure as required for building this automated solution.    Requirements: • Experience in building embedded/customized Linux systems (for example the Yocto Project) • Familiarity with TPM and Secure Boot • Experience with build automation, gitlab pipelines and runners • Knowledge of Python an...

At Nanoscribe GmbH & Co. KG, we are looking for an embedded/customized Linux expert to improve our deployment solution for the machine-control software of our 3D-Printers. Tasks: * Devising a solution for customizing and bu...solution must also conform to open-source license requirements. * Devising an automated solution for deployment and protection of our proprietary software (initial installation and the consequent software updates). * Extending our DevOps Infrastructure as required for building this automated solution. Requirements: * Experience in building embedded/customized Linux systems (for example the Yocto Project) * Familiarity with TPM and Secure Boot * Experience with build automation, gitlab pipelines and runners * Knowledge of Python and PIP server is ...

Develop an IP PBX (Telephone Server) with Asterisk based on Yocto Linux that will run in a virtualized environment on a rugged box pc, e.g. duagon BC51M. The telephone server processes function calls based on rules that are defined within the scope of the numbering plan/concept. The system is expandable and compatible at the vehicle coupling with vehicles that support the corresponding numbering plan/concept. For the signaling between SIP clients (telephones) and the SIP server (telephone server) as well as between the SIP servers, the function number plan is taken into account. The function numbering plan is managed as part of the phone server configuration. The telephone server provides an Administrative Webportal that can be used for SW/Config Provisioning, configure/manage dialp...

I need to build embedded linux images for different development boards ranging from STM32 to Xilinx. Each image needs to have different modules configured in them (e.g ssh, ftp,, wifi, ethernet, etc.) Each board might have to be configured to boot from NAND...ranging from STM32 to Xilinx. Each image needs to have different modules configured in them (e.g ssh, ftp,, wifi, ethernet, etc.) Each board might have to be configured to boot from NAND/SD-card/TFTP depending upon the requirements. The UBOOT may need to be configured for various different features. The device tree might need to be customized as well. There could be the possibility of using either Yocto or Buildroot for a given board. There might be bash scripting involved as well in terms of automating the build for a particul...

If you are good at flashing in Yocto projects, please bid

Our goal is to build a Yocto BSP for SnapDragon 410c board running on Linaro and to set up a Qt5 development environment.. We have developed a Qt5 app on a Ubuntu 20.04.2 LTS 64 bit host but we are still struggling with the Yocto recipes to transfer the app from the host to the Dragonboard 410c. This is part of a large development and once we can accomplish transferring and running this basic app we’ll be looking forward to hiring you to develop several modules on the system.

I have working binaries, and running manually. But I need auto login and auto run application on zynq board in Yocto.

I need someone to build wpe-webkit+cog using the instructions from this site: with yocto zeus for this board bsp. image will be tested and has to work on my board running cog. All steps have to be documented so as to be replicable by me. has to be built on my ubuntu container/machine wich i will provide ssh to the build machine with the BSP already in. The base image is ready, i only need to integrate wpewebkit+cog for webapp with hw aceleration.

I am looking for contractor to convert an project based on RISC-V currently running on Xilinx VC-707 utilizing Buildroot to YOCTO

Desde la compañía Nayar Systems S.L, una ingeniería de telecomunicaciones especializada en IOT industrial, sector de la elevación; tenem...procesos de desarrollo. COMPETENCIAS REQUERIDAS: Conocimiento especializado en lenguajes de programación C y/o C++. Experiencia trabajando con sistemas basados en microcontrolador, principalmente ARM. Competencia en sistemas operativos en tiempo real (RTOS). Conocimientos avanzados de sistemas operativos basados en GNU/Linux. Familiaridad con herramientas de creación de sistemas operativos como Yocto o Buildroot. Familiaridad con herramientas de desarrollo como Git, JIRA, Eclipse o Visual Studio Code. Familiaridad con metodologías de trabajo ágiles como SCRUM o Kanban. Si estás int...

Need yocto build of Linux openwrt layer for nxp mini evaluation board.

Build BSP for iMX8 board based on Yocto Zeus

We are looking for someone to produce a custom yocto image for a single board computer. The board is based on the Olimex A20 Olinuxino. The image would boot to a Qt/Qml program. Details of features required would be given to the successful candidate. Of particular note is that hardware graphics acceleration would need to be working on the image (either Mali or Lima). The project deliverables would be all the source files to reproduce the work in house.

Using the standards distribution of Linux for create a BSP using Yocto for a configuration to be discussed upon acceptance of the project by both parties

C programming, MQTT , Mbed TLS, yocto Linux, multi threading

Responsibilities • Develop, unit test, integrate, benchmark, and document product-level embedded software. • Collaborate with Software and Firmware Engineers to define the interaction between subsystems and components. • Partner with other Engineers, Software Lead, Project Managers, and Product Managers to define the scope, acceptance criteria, and planning of software features. • Work within and be accountable to Agile development processes as a member of an interdisciplinary product development team. • Plan and estimate assigned tasks with input from Software Lead. Requirements • Experience with Qt and QML, preferably in an embedded environment. • 2+ years of software development experience. • Strong proficiency with modern C++ is required (e.g. C...

...Buscamos un colaborador externo para el desarrollo de una máquina en el sector industrial. Las tareas del colaborador consistirán en la comunicación de varias placas de control (PCB) a través de Modbus y control de motores BLDC con EtherCAT. También colaborará en la programación del master (IPC). Conocimientos necesarios · Firmware: Embedded C, RTOS · Software: Embedded Linux (Yocto, Buildroot) Qt/QML (con C++ o Python) Bus industrial (MODBUS, EtherCAT) Control motores BLDC · Diseño electrónico -Posibilidad de incorporarse a la plantilla al finalizar el proyecto. -Necesidad de poder trabajar puntualmente en casa del cliente (El vallès Occidental) Periodo del ...

Necesitamos una compilación Yocto para una placa de embebidos del estilo BeagleBone y/o Raspberry. Sobre todo, es importante configurar bien el RTC. Se trabajaría en Linux, y dicha compilación estaría adaptada a nuestras necesidades hardware. Dicha compilación serviría para cargar nuestro propio software ya desarrollado.

The project consists in the development of 5 protocols in C/C++ for an IoT gateway. The people/team accepted to do this project will be supported by our development team. We accept individuals or companies, and we expect to hire 1 sen...and identify the frames that are being exchanged between two devices, monitored with a logic analyzer, to build up the protocol Telemetry: - Development: embedded - Unit tests - Testing with the controller - User acceptance tests Requirements: -Experience in C/C++ development for GNU/Linux -Experience in RTOS and ARM architectures -Experience in developing bootloaders or tools like Buildroot / Yocto -Experience in remote teamwork using Git, Jira, Eclipse, VS -Native or advanced English -Chinese not required but desirable -BSc Electronics or Compute...

Our PowerPC based system is YOCTO Project which is built under Ubuntu 14.04 with Tool Chain GCC Version 4.9.2 over the Kernel 4.1. We use Software Development Kit of the NXP SDK Version "QorIQ Linux SDK v2.0". In our system there are 6 Serial 16550 UART ports configurable to RS232/RS422/RS485. The 6 UARTs are controlled via FPGA. The SoC is connected to the FPGA via IFC bus. Refer to block diagram (attached) The Linux Kernel generic 16550 Kernel Driver has implementation of 8 bit/32 bit base. The access to our FPGA is via 16-bit chip select. The UART Control FPGA registers have the low 8 bits for actual R/W and the high 8 bits are reserved. Also it appears like we have Endian (Big/Little) polarity problem between the SoC Linux Kernel and the FPGA. The DTB is properly set...

Yocto-installing packages into linux kernel

Hi Shijith M., I noticed your profile and would like to get some help on yocto project recipes for python packages. Will you teach and help me on how to create those recipes. We can discuss any details over chat.

Hi Raju K., I noticed your profile and would like to get some help on Yocto recipes. Will you be able to do?

I have an application which I want to integrate with yocto build system and include in image. Need help using Zoom, or would like to receive ready to use configuration.

I am a developer with an excellent C/C++ programming skills. I have experience in 2D graphics technology and a good understanding of systems architecture issues. Base knowledge of embedded OS and experience in large, multi-site software development projects. Major skills: - C/C++, Bash,GNU Make - Design Patterns [GoF pattern] - Source version cont...programming skills. I have experience in 2D graphics technology and a good understanding of systems architecture issues. Base knowledge of embedded OS and experience in large, multi-site software development projects. Major skills: - C/C++, Bash,GNU Make - Design Patterns [GoF pattern] - Source version control with Git and Mercurial - QT, FLTK, WxWidgets - Autotools - CAN 2.0A and CAN 2.0B - Linux yocto - EV Charging Protocol: Chademo,...

we have a 7 port ethernet switch which is connected to fiber optics and industrial ethernet PHYs through media converters and hence since its not directly connected to PHYs, not able to figure out who would be device tree DTS file configuration. Need help with that.

Personalización de distribución de Linux Yocto. Hemos desarrollado una placa que usa un módulo embebido de TQ (el modelo en concreto es el TQMA6ULX) y necesitamos a alguien que nos ayude con la capa de BSP especifico para nuestro HW. Necesitamos tanto la modificación del kernel como la del uboot y la personalización del devicetree para que todos los dispositivos hw queden disponibles en el espacio de usuario de Linux.

develop bsp yocto for custom board

Development of Device Client Software that communicates with a Backend over 4G and with Hardware (Display/GPS Module) and fetches data from the cloud to display and sends data to the cloud backend over R...and with Hardware (Display/GPS Module) and fetches data from the cloud to display and sends data to the cloud backend over REST. Tasks: - Working on Debian/Raspbian Device Images - Integrating dependencies, applications and configuring hardware - Extending the existing Client Python Application Must: - Python - Raspbian or Debian Experience - Bash Nice: - Experience with Mender (Debian, not Yocto) - Experience with SSH for tunneling and automated device connections - Experience with IoT in General - Experience with Celular Technologies (3G / 4G) and GPS - Experience with Debian...

Hi Alexandre M., I noticed your profile and would like to offer you my project on Yocto Custom Build for Rpi and stm32. We can discuss any details over chat.

Need to Build a Custom Yocto Embedded Linux Build with Splash Screen loader for RaspberryPi

Hi Dusko D., I noticed your profile and would like to offer you my project Custom Yocto Embedded Linux Build with QT for RaspberryPi. We can discuss any details over chat.