Modbus tcpip microcontrollermunkák

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Hello Vadim. As per our discussion earlier I would like to offer you an opportunity to create another project for us. We look in to connecting and communicating with display TVT0220DE-T (I sent you datasheet earlier). This project requires: 1. Create a schematic diagram to connect display TVT0220DE-T and STM32F429 microcontroller together. We will need that schematic from you first. 2. Modify and write code (probably addon) to previously written project code to allow use of this display.

Nous développons notre réseau de bornes de pressing en mode drive, qui permet aux usagers de déposer leur linge 24/24 7/7 afin qu'il r...installé sur la borne. Nous souhaitons faire évoluer l'appli web qui a été développée autour du framework Sylius ; Les évolutions concernent notamment la prise en compte des nouvelles fonctionnalités de la borne, sa communication avec une API elle-même reliée à un module Modbus permettant le pilotage des composants mécaniques de la borne (moteurs, sondes, vérins...). Les développements seront faits en étroite collaboration avec le chef de projet et les équipes travaillant sur la partie automatisme et sur l...

Need someone who can do microcontroller programming/ IC programming for ring light manufacturing.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

I require a custom microcontroller to be designed - based off of an Arduino Prototype model I have already developed. Therefore, the chipset should be the same as an Arduino - however I do not require all the connections/ports available on a standard arduino and therefore want a custom board. The board needs to connect to an LCD Screen which uses an Drive IC: ILI9486/ILI9488L. The screen requires an input voltage of 2.8-3.3V. The board should also have Ethernet connectivity - and the option to power the board via PoE or conventional USB power connection on the arduino. I look forward to working with you simultaneously on this project.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Hi Narayanan Nampoothiri K., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I need help with an RTOS based OS on s32k148 microcontroller. Maybe it interests you

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

STM32F103 GRBL CNC 6 Axis microcontroller, 5 axis movement, plus two motors for soldering metal input, and solder cleaning. 4 buttons and 5 photoelectric sensors. Don't need very specific code, something just to show for school.

We are developing smart devices for farmers such as smart ear ...basic logic would be simply collecting sensors data using microcontrollers and transferring them to a gateway which will be 1-5 Km away (or less if it is the closed farm) from the multiple on-animal devices. The scheme for the current moment is: GPS + Heart rate + Movement → Microcontroller with LoRa, powered from battery + solar panel → LoRa gateway → Webserver → Web- or Android/IOS-app. Tasks: - Schematics - Recommendations of hardware (since the housing will be limited) - Software for the microcontroller and gateway - Prototyping (if possible) - Webserver - App At this point, we start with the first three steps. It will be the first block. We are waiting for your propositio...

An asynchronous SPI slave is required that shall connet to an SPI master at 20MHz SPI SCLK frequency. The SPI slave exists inside an FPGA. The SPI master exists inside a microcontroller. The FPGA system clock is going to be 40MHz-60MHz. The SPI SCLK and the FPGA system clock are asynchronous. The SPI slave is used to read/write fabric RAM registers that control the behaviour of the FPGA design or present FPGA design status information to the SPI master. The SPI slave is also used to stream data from FPGA block RAM. The block RAM has 32 bit data width. The SPI master shall perform 16 bit accesses at a time with data shifted into master on rising edge of SCLK and shifted into slave on falling edge of SCLK. A slave select line exists to tell the FPGA of start and end of transmissi...

I am using SAM microcontroller to connect via a sensor. It needs two libraries in Arduino, I need to import it in Atmel and standard C, Auto import doesn't work well though. I need someone who can convert Arduino Code to Atmel Code for SAM microcontroller. Kind regards

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

I want to build waste monitoring level using JSN-SR04T-2.0 Ultrasonic sensor and HTCC AB02A microcontroller that I program in Arduino IDE. I want a program that does these things: 1- Delay for 3 minutes to run a program once my board is powered on. 2-Measure the distance once and retain it as a total height of a bin 3-Measure repeatedly distances 4-Compare if distance measured is in the range of 20cm-600cm. So that if the distance is less than 20 cm, display out of range 5-Calculate and display the percentage of level as 100*distance/total height

I need to write C program to do the exact functions , but the serial output shall be based on modbus rtu this project done in gut hub in low level language with stm8, the new ones coming from china comes with N76E003AT20 as direct pin swap to stm8 with bigger memory

I need stm32f103 configured has 4 analogue inputs, also conncted to i2c ac1115 , 2 PWM output with variable freq and duty cycle also controlling buck converter through pwm top set a voltage from 3 to 12 vdc to test the operation of a small dc motor where i can take the voltage and current reading to send it to the esp32 working as access point server , i need nice gui from chart gauges and sliders to control the 3rd pwm and set the voltage also be able to record fixed samples of reading can be preset and save the readings on a file on the spiff storage of the esp32 also i need to be able to retrieve the saved file/data and show it on the web server to compare it with current testing dc motor, i need all the load on the stm32 so u can free the esp32 just to work as web server, similar pr...

I need to write C program to do the exact functions , but the serial output shall be based on modbus rtu the module has rs232 pins can be used to send data , i need it programmed with Keil in C language as modbus rtu where I can connect it remotely to any modbus server

I want to build chrome extension to extract child elements from a user specified div and forward them one by one on a local port using tcpip connection. Another application (not part of the project) will process and use that data. Website address, parent div class name, IP address and port should be configurable. There can be multiple sites that can be configured and rest of the parameters will be per site

The task involves reading data from modbus using python code and sending to an api via mqtt.

I need to write C program to do the exact functions , but the serial output shall be based on modbus rtu in this link

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

The company is venturing into biomedical devices and wants an electronics system design engineer for a particular project. We need to design and manufacture a microcontroller and a microprocessor for the task which is to be achieved are listed in the block diagram attached in the following post.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

I’m looking for someone to review the concept for a device that uses an ESP32 microcontroller to keep a heating element at a specific temperature using a PT100 temperature sensor and also detect colour with a photodiode. You’ll need to produce a final circuit diagram as part of the review.

Embedded Development Someone to write USB host software to create a virtual serial port on any microcontroller (RP2040 preferred). Looking for similar functionality to this:

Hello, I need help for mapping 2 Digital Inputs and 2 Digital Outputs from the M221 Schneider PLC to the MODBUS TCP in order to read them from on BMS server. I just need help to program the PLC.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

About me: I'm self-taught, with intermediate-ish knowledge of electronics and microcontroller programming. About you: You have experience working with mems IMUs and microcontrollers such as Arduino/Espressif. You have an understanding of how to manipulate the data from an IMU or gyroscope sensor to best fit the needs of a project, e.g. the appropriate BW, range, smoothing, etc. You know how to update register values of a sensor and have experience with calibration and sensor fusion algorithms. You have probably used various different sensors and can share advice about selecting between them. If you have experience transferring a project from discrete components into a PCB, that's icing on the cake. About the task: I am using a BNO055 sensor with a ESP32 development boa...

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

What we seek is that a small gadget, I will provide sizes later on, which has an ultrasonic sensor and checks the liquid level of a tank and sends the data by connecting to the internet via Wi-Fi to a specific web server. The project comprises 2 parts. 1st part is electronic component selection, schematic design, and simple layout. -----There should be one button for on/off and Bluetooth synchronization. -Battery-powered, preferred 3V coin cell battery. -Ultrasonic sensor range is between 0.05 to 2 meters. -I will provide websites for component selection. 2nd part is firmware based on chosen micro-controller. -On/Off by pressing the button for 5 seconds. -Bluetooth will be activated only for a minute after pushing the button 5 times. -We will use Bluetooth only for sending SSID and Passw...

...fault in electrical line, then the line man will switch off the power supply to the line by entering password and comfortably repair the electrical line, and after coming to the substation line man switch on the supply to the particular line by entering the password. Separate passwords are assigned for each electrical lines. Principle of Operation The main component in the circuit is 8051 microcontroller. In this project 4×4 keypad is used to enter the password. The password which is entered is compared with the predefined password. If entered password is correct, then the corresponding electrical line is turned ON or OFF. In this project, a separate password is provided to each electrical line. Activation and deactivation of the line (circuit breaker) is indicated by the...

Need a board driven by microcontroller, should have 16x2 display, bluetooth, 2 relay, and one dimmer circuit. should not be based no arduino, any microcontroller that is cheap is ok.

Making a ball and beam balancer using teensy as a microcontroller, it uses Arduino software or Simulink. we to build a transfer function and MATLAB code to use that in Arduino.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Embedded Development Someone to write USB host software to create a virtual serial port on any microcontroller (RP2040 preferred). Looking for similar functionality to this:

Embedded Development Someone to write USB host software to create a virtual serial port on any microcontroller (RP2040 preferred). Looking for similar functionality to this:

Project will require modification of a design of a microcontroller device based on ESP32 chip. It will be a universal IoT/automation programmable platform that is compatible with Arduino SDK and standard libraries. It will have several input/output types and should be fit into a standard DIN rail mountable enclosure. What we currently have is a Logical diagram (with a different microcontroller) of the circuits for a 3 PCB platform. We also have a BOM. we don't have the PCB layout and we have nothing regarding enclosure design. The project would involve the following activities: 1) Modification of the current logical diagram. The following points should be changed: a) microcontroller changed from ATmega2560 to ESP32 (revise all other changes that this could le...

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...Description), with more detailed Information, ideas on how I envisioned it being implemented and requirements. About the Project: The project is a smart hydrometer for measuring the density of the liquid. To achieve this, you put the calibrated Device in the liquid and can calculate the buoyancy and density of the liquid by the position of the device in space. The heart of the Device is a Microcontroller with Wifi/Bluetooth (ESP32) connected to a position sensor. The position sensor provides the current position in the room and thus the device can draw conclusions about the density of the liquid and the fermentation process. Referring to the image on down here, this means the hydrometer, represented by the gray rectangle is now just in a fluid of 0 Plato in a 20 angle from t...

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

I would like to have a custom prototype board. I have designed the schematics, and now need a PCB layout design for the same. The board consists of a microcontroller, all pin outs, tiny power supply, usb-to-serial chip circuit. All are SMDs except the Micro DIP IC, 5mm LEDs. It would be a double sided board, measuring approx. 70mm x 100mm. Request quote for the same. [Removed by Freelancer.com Admin for offsiting - please see Section 13 of our Terms and Conditions]