Rc4 verilog fpgamunkák

We are currectly looking for support to write a simple motor model in VHDL, that will be used to test our motor controller in FPGA. The motor model shall be as simple as possible and an equivalent Matlab/Octave/Python/C/C++ model would be desiderable and used to validate the VHDL model

Project Title: Accelerometer control Platform: FPGA Skills and Experience: - Proficiency in working with FPGA platforms - Strong understanding of accelerometer technology and control - Previous experience in developing projects using accelerometers Project Requirements: - Develop an accelerometer control system using an FPGA platform - The main function of the system should be orientation detection - Successful freelancers should include their past work showcasing their experience in working with accelerometers - Detailed project proposals are not necessary, but a clear understanding of the project requirements and the ability to meet deadlines is crucial Deliverables: - A fully functional accelerometer control system that accurately detects orientation - Documenta...

I am looking for a skilled freelancer to implement the JESD protocol on an FPGA device. The desired data rate for the implementation is 1 Gbps. Skills and Experience: - Experience in implementing the JESD protocol - Proficiency in FPGA development - Knowledge of high-speed data transfer and communication protocols Project Timeline: - The deadline for this project is within 1-2 weeks. Please provide examples of previous work and relevant experience when submitting your proposal.

I am looking to write and read memory from an EEPROM with a FPGA. The desired size for the EEPROM is 32kb and I need to use I2C as the communication protocol. I have a specified model for the FPGA, Cyclone IV. The project should also include the development of software code for the FPGA to control the EEPROM operations.

I am in need of an expert with FPGA Verilog/VHDL experience in Xilinx. The project requires advanced programming skills in Verilog/VHDL and must be completed within a week. You should have a Xilinx board to work on this project. Tasks: - Programming in Verilog/VHDL Ideal Skills and Experience: - Expertise in FPGA Verilog/VHDL - Strong knowledge of Xilinx - Advanced programming skills in Verilog/VHDL Deadline: - Within a week

I have an FPGA carrier board and I am interested in someone to review it and make any suggestions for improvement. This is a carrier board for an Alinx FPGA core board. It is basically a version of Alinx's carrier board with all the parts I don't need removed. The board has 10G Ethernet via an SFP, Gigabit copper Ethernet, USB 2.0, and a few minor things. I developed this board because I need to generate the SFP clock differently, and the off-the-shelf board cannot accommodate the change. I stuck closely to Alinx's design for maximum compatibility with our current usage of the Alinx board, so this request concerns not the parts but the PCB layout. It is a 4-layer design in KiCad. I tried to take care with impedance and layout, but a more experience set of eyes...

I am seeking an experienced professional to help with a project involving Xilinx FPGA development. I am using the Xilinx Zynq-7000 board and the main function of the board in my project is to process data. I need help with both hardware design and software development for this project. The qualified candidate should have significant expertise in hardware design and software development for FPGA systems. Excellent knowledge of C/C++ and VHDL for FPGA design/programming is also necessary. The candidate should be able to understand and utilize various types of FPGA peripherals and interfaces including, but not limited to, SPI, I2C, UART and Ethernet. Working knowledge of the Zynq-7000 series FPGA board and its associated software/tools (e.g. the Xilinx Vivad...

I want to implement the Ethernet connection between FPGA board to PC. The deliverables are as follows - Verilog code to run on a Spartan 6 Board - (xc6slx100) - Simulation time diagrams (more details will be given to the winner) - The code should be able to transmit and receive data at 1000mbs.

- A report of minimum 6 double-column pages for the case study It should follow the IEEE Template (). - Select a research problem in FPGA - Do a literature review. - Perform implementation of at least one paper (if any) - Discuss the available solutions to the problem - Propose a novel solution to the problem (if any)

Project Description: Can you help me with a mini spectrum analyzer using FPGA the results will be on a pc screen with GUI that the user can put markers on and change the resolution, to make a spectrum analyzer with FFT algorithm on FPGA Using UI the user can control the span a put markers. The user will be able to change parameters in a user interface. The ADC is the sampling. The FPGA is going to calculate the FFT. The all idea is to mini spectrum analyzer (the measurement device). Block chain 1. ADC for sampling 2. FPGA to calculate the FFT and sent it to the pc display

Project Title: FPGA Xilinx Spartan 7 for Digital Signal Processing Application Skills and Experience: - Proficiency in FPGA development using Xilinx Spartan 7 - Strong background in digital signal processing - Experience in writing HDL code from scratch - Familiarity with FPGA design tools and methodologies Project Description: We are looking for a skilled FPGA developer with expertise in Xilinx Spartan 7 to assist us with a digital signal processing project. The main application of the FPGA will be digital signal processing, specifically in the area of [insert specific application]. Requirements: - Develop FPGA design using Xilinx Spartan 7 for digital signal processing application - Write HDL code from scratch based on project requirements - I...

Hi I am writing the code for UVM verification environment for the AMBA AHB. I have all the code but facing problems integrating it with errors. It's to be done in vivado or questasim. It's in system verilog language. I need it in 2 days. We could discuss the price based on the difficulty and time you have to give on this.

My experience with deploying Caffe networks on FPGA boards is intermediate. I have prior experience with the Lattice Radiant software so I am ready to use it for this project. My specific task or outcome I want to achieve with this deployment is Image Classification using the ICE40UP5K FPGA with the iCE40 UltraPlus Breakout Board and Lattice Radiant software.

My experience with deploying Caffe networks on FPGA boards is intermediate. I have prior experience with the Lattice Radiant software so I am ready to use it for this project. My specific task or outcome I want to achieve with this deployment is Image Classification using the ICE40UP5K FPGA with the iCE40 UltraPlus Breakout Board and Lattice Radiant software. Details: 1, I already built a caffe network, just need to deploy it 2, the input of the caffe network is supposed to be an image but right now the input of the caffe network are 32x32 matrix and output will be 1 or 0. I want to test that with deploy the model on ICE40UP5K 3, I will provide the network file, and the final result will be a project file and can use my caffe network, have hardcode a 32x32 matrix and output ...

My project is about FPGA programming for control systems. I'm using the Altera Cyclone V board and the preferred programming language is Verilog. This project requires someone with experience in FPGA programming and the design of embedded systems. The programmer should be able to develop design flows for FPGA devices, debug them and modify existing designs for better performance. The knowledge of hardware description languages such as VHDL and Verilog is crucial, as they will be used for implementation and testing of the designs. Additionally, some knowledge of microcontrollers and communication protocols will be required. The right person for this job should have strong problem-solving skills, excellent coding and debugging capabilities, and a deep ...

I am in need of an experienced and professional digital circuit designer to undertake a project involving Verilog coding, RTL verification, and FPGA implementation. Specifically, I need the Verilog coding to be at the intermediate level and it must meet specific requirements. The scope of this project is just Verilog coding running though Xilinx Vivado IDE. The successful applicant must have a good understanding of design flows to be implemented in Verilog, including synthesis and simulation techniques, as well as a thorough knowledge of all aspects of Verilog coding and digital circuit design. Experience with RTL verification and FPGA implementation will also be beneficial for this role. Ultimately, I am seeking an individual who is able to...

I am looking for someone to help me with the installation and setup of the Ironfish miner on my Windows operating system. I will use FPGA or GPU solution of teamredminer. As a beginner in cryptocurrency mining, I am in need of assistance from someone with experience in this field. Some of the skills and experience ideal for this job include: - Proficiency in installing and setting up mining software - Knowledge of the Ironfish miner and its specific requirements - Understanding of Windows operating system and its compatibility with mining software - Patience and ability to explain the process to a beginner in a clear and concise manner - Troubleshooting and debugging skills to address any issues that may arise during the installation and setup process If you have previous experien...

I need someone to help boot petalinux

We are searching for support on debug test and addition of a couple of features to a project we developed last year The board is a synchronous (with GPS PPS signal) acquisition from 7 ADCs. The clock is generated internally from a PLL, locked to the PPS. Lattice ECP5 on a custom board There are 2 external interfaces to an IMx6 SPIM: Spi Slave, the Master is a Imx6 processor, which is used to write and read internal registers and ADC’s registers. Details on the protocol in the FDD SPIS: Si Master, the data acquired from the ADCs are packed and sent to the external IMx6 Modifications ADD MEMS Accelerometer, ADXL355 channel modify the data stream, adding 8th channel. A review of protocol might be needed ADD Registers to control DAC and discretes ADD DAC. We can share a DDS to generate ...

I am looking for a skilled ARM embedded freelancer to assi...Purpose of the Embedded System: - Personal project Hardware and Software Requirements: - I have specific requirements Ideal Skills and Experience: • Good grasp of fundamentals in Electronics Engineering, • Knowledge of digital electronics, VLSI, microprocessor architecture is a plus • Interest and experience in digital design and verification • Good understanding of Assembly-level programming, Verilog/VHDL • Proficient in C/C++, and scripting languages - Strong knowledge and experience in ARM microcontroller programming - Proficiency in real-time operating system (RTOS) development - Expertise in embedded system design and implementation - Familiarity with the specific hardware and software req...

...connection via 10/100 M port 4) Audio processing to filter unnecessary noise from Microphone 5) IPv4 / IPv6 based routing for minimum 9 nodes (communication between atleast 9 C3/S3 boards via ethernet/wifi).Important one- will tell in detail via chat. 6) Getting the chip into low power consumption mode. Note: The ESP32-S3/C3 will be interfaced to an FPGA via SDIO interface. So,the software should be easy to read and use. So,that the FPGA guy can interface the chipset with less trouble. Library for the GNSS/other modules may not be freelancer should take care of them. Datasheet and other technical details will be provided. More details will be given via chat. Circuit design etc.. Please note that all these can't be achieved via Arduino. So,I am looking for s...

I am looking for an experienced Verilog FPGA specialist to develop a reliable and efficient code for me. I do not have a specific functionality in mind, but I do need the code to have a clock frequency of less than 100MHz and fewer than 10 inputs and outputs. I would also like to ensure that the code is reliable and bug-free. If you have the expertise and skill set to deliver a high-quality solution, please contact me. I look forward to hearing from you!

I am looking for an experienced FPGA developer to help me with a project. The desired application for this project is Embedded Systems and the software preference is Telecom, which I need to be completed within 1 month. The expertise of the developer should be suitable for this type of development, and must have experience with Xilinx Vivado, Intel Quartus or Lattice Diamond. Time is of the essence, so I’m looking for someone who can hit the ground running and begin the project as soon as possible. If you feel you have the necessary skills and experience for this project, I look forward to hearing from you.

...experience and knowledge in FPGA to interface RF AFE chip from analogue device(exact part number via chat) Desired FPGA- xilinx Zynq/ equivalent series, Cyclone/equivalent from altera. The FPGA will be interfaced with the AFE and will act as an DSP. Apart from the AFE the FPGA is expected t be interfaced with: 1) Display module 2) Keypad 3) Memory 4) Microphone 5) ESP32C3 and GNSS module. Additional MCU/processor can be added to reduce the burden on FPGA. It can be decided after discussing. The FPGA will perform the DSP task and will be used to transmit RF waveforms. It will be used to perform frequency hopping and encryption (AES-256/SHA) task for the waveform. More detailed information via chat. Eligibility: The freelancer must ha...

Hello, I am looking for experienced person who has experience in high speed and RF PCB design to choose the required components and design a PCB for an SDR with specifications as below : RF specs: Frequency range: 20MHz to 580MHz Channel bandwidth: 25KHz to 5MHz Hoppinng feature: Yes Modulation: AM, FM, 4FSK Data rate: Atleast 2 Mbps The SDR should have an onboard FPGA/SOC for encryption and encoding purpose and for use as DSP. Other interfaces in the PCB: 1).Display 2).Dail/Keypad (commercially available ones) 3) other necessary interface via chat. Additional and accurate information will be be revealed to qualified users via chat. Requirement: Only the PCB needs to be designed and freelancer should find the required components (COTS components only) and assist

perform a side channel attack specifically a template attack on a target device using a chip whisperer tool. You will be attacking a low powered FPGA that uses an encryption scheme. The task involves, programming a FPGA, performing a template attack, and recording all results and steps to do so.

Task description. we have a fork of a VScode extension which we customized (modifying snippets and some minor modification) This should be extended, we want to create an extension to be used internally to the company by every FPGA designer the extension shall support VHDL and Tcl (snippets and language syntaxes files are there already) Add Tcl language support (, ) but we would like to add the capability to call external Tcl scripts, right clicking on a vhd file in the Explorer Tab

I am looking to use FPGA and a neural network to complete a financial forecasting application. The complexity level of the neural network is intermediate and I will provide specific details about the hardware and software preferences for the project. Accelerate

We have a custom board with some perhiperals. We designed a FW, and verify the interface with some ADC. We need to add a couple of small functionalities (an accelerometer via SPI and a DAC). this will requires minor modifications to 2 SPI, used to interface with an external microprocessor. Test and debug is also needed

Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with Yocto

I am looking for a Hardware Architect/Designer with experience in designing complex FPGA boards. Requirements: - Experience in designing boards for CPUs, FPGAs and uC - Experience in process-driven development environments - Experience in requirements engineering - Knowledge of companion devices integration - Familiarity with connecting cameras to FPGA boards Skills and experience: - Hardware requirements engineering (preferrably with Polarion or DOORS) - Proficiency in FPGA board design and development - Circuit design and layout (with Altium Designer) - Strong understanding of companion devices integration - Experience in designing FPGA boards with camera (3D-SDI) and display (HDMI) connectivity - Knowledge of further interfaces like CAN, UART etc. The prod...

Project Description: Build Pulp Snitch Cluster for Xilinx FPGA Board I am looking for a skilled and experienced developer to build a Pulp Snitch Cluster for my Xilinx FPGA Board. The ideal candidate should have expertise in System Verilog programming and configuration. Requirements: - Create a project, so Pulp Snitch Cluster can be built for Xilinx FPGA Board (Kria 260) using command line - Strong knowledge and experience in System Verilog programming and configuration Skills and Experience: - Expertise in System Verilog programming and configuration - Familiarity with Xilinx FPGA Boards - Familiarity with Xilinx tools (Vivado, etc..)

Our Company, Sanion, is located in Incheon, South Korea. We are leading Korean company which m...long term. We are specifically looking for any engineer who has some experiences on embedded Linux, FPGA or embedded programming to work on the firmware of our embedded device. If you are interested, please contact us to discuss about the offer in details. Skills and Experience: - Proficiency in embedded system development - Strong knowledge of programming languages such as C and C++ - Experience with hardware and software integration - Familiarity with microcontrollers and microprocessors - Understanding of electronics and circuit design - Ability to work independently and meet project deadlines - Willingness to relocate to Korea for full-time employment - Knowledge in Embedded Linu...

Project Title: Familiarize with pulp-platform/snitch Description: I'm seeking the one who can make me familiarized with pulp-platform/snitch. As of the output I expect to have : Completed documentation, from which I ...other tools) 2. Have understanding of how to run unit tests for given modules/cores/clusters/whatever 3. Embed custom IP into a snitch cluster; connect it to the axi crossbar, make it configurable by one of the cpu's/external tool 4. Use xilinx simulator for the purpose of unit tests (as a bonus) Note: latest version of the pulp/snitch must be used Skills and Experience: - Experiense with system verilog/ verilator/ system c/ make/ python - Experience with pulp-platform/snitch - Strong understanding of hardware and software integration - Communication and ...

I am looking for an experienced PCB designer with intermediate level skills to help me with a project. The ideal candidate should have experience in designing mixed-signal PCBs and should be familiar with Microchip or Xilinx FPGAs. Requirements for the project include: - Designing 4 simple PCBs - Integrating both digital and analog components on the PCBs - Proficiency in using Xilinx FPGAs Skills and experience required for this job: - Intermediate level PCB design - Experience with designing mixed-signal PCBs - Familiarity with Microchip or Xilinx FPGAs If you have the necessary skills and experience, please submit your proposal.

i want to have code for board Atlys Spartan-6 FPGA this board have 2 hdmi input and 1 output i want to got input 2 source video in hdmi have same image and compare this video if there is any different between 2 hdmi hide this different with watermark and make output video to hdmi output

I am looking for a person who can work with Quartus Prime to help me with designing a digital circuit. I will provide detailed instructions for the specific tasks that need to be done. The project will require documentation for all tasks. Ideal Skills and Experience: - Experience in designing digital circuits using Quartus Prime - Proficiency in programming FPGA - Knowledge of simulating designs using Quartus Prime - Strong attention to detail for documenting tasks

I am in need of an FPGA VHDL expert for a design and implementation project. Skills and experience required: - Expertise in FPGA VHDL design and implementation - Strong knowledge of digital design and verification - Proficiency in troubleshooting and debugging FPGA designs Successful freelancers should include their experience in their application, showcasing their past work and relevant projects they have worked on. The desired turnaround time for the project is 2-4 weeks.

Project Description: I am looking for an experienced FPGA developer to implement a PL UART communication module on a Zynq FPGA. The project requires the following skills and experience: - FPGA development experience, specifically with Zynq FPGAs - Knowledge of UART communication protocols - Proficiency in HDL programming languages such as Verilog or VHDL - Ability to implement custom baud rates for UART communication - Experience with interrupt handling in FPGA designs - Strong understanding of intermediate level communication requirements The main objectives of the project are: - Implementing a PL UART module on a Zynq FPGA - Supporting selectable baud rates for UART communication - Triggering an interrupt after a successful transmission - Ensu...

Can you help me with a mini spectrum analyzer using FPGA the results will be on a pc screen with GUI that the user can put markers on and change the resolution, to make a spectrum analyzer with FFT algorithm on FPGA Using UI the user can control the span a put markers. I have attached a word document which explains the project in complete details, kindly read the attached file and let me know if you can handle this task. My budget for this task is 100-150 USD and deadline is 2-3 weeks

We are looking to replace a Graphics LCD display with 320x200 pixel resolution using a SED1330/1335 Controller with a modern TFT or OLED based solution with 400x300 pixel resolution . The scope of the project will be to suggest a low power ,MCU suitable for this task or a FPGA/CPLD based solution , develop and debug the code to convert the data from the SED1330 commands to serial commands the new display can process and scale the data to fit the higher screen resolution . All hardware design will be performed by us

I need an experienced programmer to write FPGA test code for an upcoming project. The code must be tailored specifically for the Xilinx FPGA PART No: XC7K325T-2FFG676I that I am using. As this project requires moderate complexity, it is essential that the person I choose has a sound knowledge and understanding of FPGA programming. The code I am looking for is interface testing code for Audio IC (Audio Codac Part No: ADAU1761) with FPGA. Problem Statement:- We have to test the Audio interface of our customized FPGA board(FPGA PART No: XC7K325T-2FFG676I), so we need a VHDL/Verilog code for Audio IN/Out. Means, when we give input from Mic in audio in, same will be transferred to Audio out which we will hear from speaker. If...

Project Title: FPGA zynq700 Communication Protocols Code Development Specific Functionality: - Develop code for FPGA zynq700 to perform communication protocols Skills and Experience: - Proficiency in FPGA development, specifically with zynq700 - Strong knowledge of communication protocols Timeline: - Code completion within a week

The project is about integration of a high performance FPGA API and large image data acquisition into a UI. In a first step, we want a simple UI that connects to a FPGA and displays and stores large image data files in ome-TIFF format.

I am looking for an expert in Verilog and FPGA development to help with a project involving a UART. The project requires the following: Data Transfer Rate: - The required data transfer rate for the UART is up to 115200 bps. FPGA Board: - The specific FPGA board being used is Xilinx. Functionality: - The desired functionality of the UART is basic data transfer. Ideal Skills and Experience: - Strong knowledge and experience in Verilog and FPGA development. - Familiarity with Xilinx FPGA boards. - Experience in implementing UART functionality. - Understanding of basic data transfer protocols and techniques. If you have the expertise and skills required for this project, please submit your proposal.

I am looking for a freelancer who can write code for the PAM4 on the Zynq-7000 FPGA board. I have specific requirements for the PAM4 code and the intended application is in Optical Communication. Skills and Experience Required: - Strong knowledge and experience in FPGA development, specifically with the Zynq-7000 board - Familiarity with OOK code - Understanding PAM4 decoding.

Is there anyone available to provide support and guidance for debugging an FPGA using Vivado and measuring the programmed FPGA signal for compliance testing on an oscilloscope? We are seeking assistance in effectively troubleshooting the FPGA design, ensuring the compliance test signals are generated correctly, and accurately capturing and analyzing the FPGA signals on the oscilloscope to validate compliance with the desired standards. Any support or expertise in this area would be greatly appreciated.

The states are Idle state, Authentication state, menu state, withdraw state, deposit state, mini statement state, extra states can be added, if necessary. Moore implementation would be ideal as it is easy to implement, the model should be able to perform contain the following: 1)Withdraw 2)Deposit 3) Mini statement (up to 4 transactions) 4)Block the account for 24hrs if an incorrect pin is entered 3 times It is preferable if the Implementation of the STATES is done in different submodules and overall flow is controlled by the Main module containing the FSM. I/O utilization is recommended to be kept at minimum. Simulation with testbench simulation, Synthesis and Implementation is desired. Assume required power constraints and timing constraints for the model to work. Assume any other speci...

We used one design service comapny for one ASIC project, and they have completed the ASIC design and deliver...one design service comapny for one ASIC project, and they have completed the ASIC design and delivered whole design data with their environment to us. We don't have hands on ASIC design capability in house, we need somebody's help to re-build the design environment, install free window base verilg simulator. The consultant shoud re-build the design environment in our PC using window base free verilog simulator, and generate some vcd file for test house. Also, we need document that describes the design environment. I'm expcting it'll be 1 weeks project by experienced VLSI engineer, and shoud be done on site. we are located in Santa Clara, CA. we need ...

1. 将测温电路输出的模拟电压信号经过模数转换器变成数字电压信号输入到FPGA 2. 对测量值和期望值进行比较（PID） 3. FPGA根据比较结果生成PWM（作为开关）控制加热电路 4. 加热电路是一根电阻丝，通电流来加热 5. 配置通信模块：将通信模块与FPGA连接，并使用相应的协议（例如UART、SPI或I2C）配置通信模块。 6. 编写上位机软件，能设置目标温度（4.27K），显示当前温度 7. 测温电路电压与温度的关系是65V/K，环境温度波动是10mK，要达到的温度的分辨率是10µK 8. 测温电路已经做好，不包含在这个项目里 9. 开发环境：Vivado 2018.3 FPGA型号：AX7A200T