Zedboard dmamunkák

I having a Application project on vitis that i need to run to see the result on zynq zedboard . Since i dont have the board , im looking for someone to run it and instruct me how to set up the zedboard to run the project. Im working on Windows OS

We are looking for an experienced freelancer to create a custom DMA firmware using this simple guide : The guide provides detailed instructions, but I lack the time to complete it myself. The project will be executed on a Squirrel 35t board and should not take more than 3-4 hours for someone proficient. **Tasks:** - Configure and customize firmware based on pcileech-fpga - Use Vivado for development - Emulate TLP and configure the configuration space **Required Skills:** - FPGA design and programming - Experience with Vivado (Xilinx) - DMA firmware development - Verilog/VHDL programming - Debugging and testing embedded systems

...development board. This project requires implementation of PS side SPI0, SPI1 and DMA to move data from 2 SPI slaves to onboard DDR3 memory. 1) Use your own Zynq 7000 based development board (e.g Microzed, Zedboard etc having DDR3 memory) that you already have. 2) To this board connect 2nos. of SPI EEPROM. We will supply you with the EEPROM boards with jumper cables on other end to connect to your development board. 3) 1st EEPROM connects to PS SPI0 & 2nd EEPROM connects to PS SPI1 interface. 4) Both the SPI interfaces will be configured to operate at 25MHz SPI clock frequency. 5) Configure the PS DMA (2 channels would be needed) for both PS SPI0 & PS SPI1 to read the SPI data and transfer that data to DDR3 using DMA at highest speed possible. 6...

I'm seeking a skilled developer who can seamlessly integrate Radius Manager ...with Sage One, with two primary augmentation features: 1. Account Status Notifications: The system must automatically update clients about their account status. The notification methods should include Email, SMS, and WhatsApp messages. 2. Client Suspension/Activation: Depending on the payment status, the system should have the ability to either suspend or activate the client's accounts. 3. DMA Radius handles 4 companies the integration needs to get the needed information from Sageone per company and suspend or activate the client. Proficiency in application integration, knowledge of Radius Manager & Sage One, experience with diverse notification channels, and a good understanding is re...

I am looking for an experienced freelancer to develop custom firmware for a specific DMA card model, PCILeech (CaptainDMA). The firmware needs to be compatible with EAC, BE, Faceit, and Vanguard anti-cheats. Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, specifically PCILeech (CaptainDMA). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your proposal with relevant examples of...

Kérjük, regisztráljon vagy jelentkezzen be a részletek megtekintéséhez!

I'm seeking an experienced and detail-oriented developer to create a Custome PCILeech firmware for SCREAMER PCIE SQUIRREL direct access memory card utilizing the 7 Series FPGA 35t chip. Firmware must emulate a real PCIe device and handle TLP requests. Make sure to use the PCILeech bitstream made for the Squirrel. Firmware must bypass and avoid anti-cheat detection on EAC/BE etc. Responsibilities: - Develop firmware for PCILeech FPGA - Debugging and problem-solving throughout firmware development Skills & Experience: - Strong experience in FPGA programming and firmware development - Excellent debugging and problem-solving skills - Experience with high-speed data transmission - Proficiency with VHDL/Verilog languages The timeline for project completion is flexible, indicating a s...

I need an advanced software engineer with experience in C++ and embedded systems. Currently, I'm facing an issue where there's no PWM output in the audio player I have on STM32G030C8. The player needs to RAW Audio stored in an array via DMA. Here are my requirements: - Debug the STM32G030C8 code on STM32CubeIDE and resolve the PWM output issue using DMA I've verified the PWM configuration settings on STM32G030C8 from the datasheet and reference manual but the issue still persists. The fixing of this issue would entail a deep understanding and proficiency in debugging STM32 controllers. Previous experience in Timer PWM configuration would be advantageous . I've included all the project and generated files

...SerialNumber=1 lt 1.896493] usb 1-1: Product: QEMJ USB Tablet [ 1.897115] usb 1-1: Manufacturer: QEMU [ 1.897717] usb 1-1: SerialNumber: 28754-09000:09:01.2-1 [1,8994721] vda: vdal vdaz [1,9143631] [TIM] Zone kernel: Available graphics memory: 7939878 kiB [1,9151741] [TIM] Zone — dma32: Available graphics memory: 2897152 kiB [1,9284341] [TIM] Initializing pool allocator 1,9213951] [TIM] Initializing DMA pool allocator [1,9232711 [dem] fb mappable at BxFCABAAAA lt 1,9239085] input: QEMJ QEMU USB Tablet as devices/pcigada:8A/9908:88:81.2/u b1/1-1/1-1:1.8/input/input4 [1,9258961 [drm] vram aper at BxFCBABABA [1,9265801] [dem] size 33554432 [1,9271171 [dem] fb depth is 24 [ 1,9277821] [dem] — pitch is 3872 [ —1.929852] fbcon: cirrusdrmfb (fDB) is primary device [ &m...

...developing a tool that creates tailor-made 1:1 firmware for various DMA devices. The device type will remain undisclosed at this point, however, the tool should be crafted with an open architecture in mind, implying versatility and adaptability to a range of DMA devices. The tool shall allow us to input the .coe file produced from the telscan to create faceit and vanguard compatible custom firmware each time. The custom firmware must bypass face it and vanguard anti cheat. Please note the firmware must not be "pooled" or shared in anyway besides the bypasses. Key aspects to be noted for this tool creation are: - The tool ought to support high-speed data transfers as one of its core capabilities. - Freelancer’s depth of experience with DMA tool creat...

I need support from a competent freelancer to develop a custom firmware for a DMA card model. The ideal professional should have extensive experience in firmware development. Key Features: - The firmware needs to be compatible with Faceit anti-cheat as well as Vanguard anti-cheat. - Importantly, the firmware should be designed in such a way that Windows can easily load a driver for it. Specifications: - As it stood, there are no existing technologies or databases that I want to integrate this firmware with. The project essentially should be done from scratch, hence creativity and originality will be instrumental. Field-upgradable or Not: - I am currently undecided on whether the firmware needs to be field-upgradable or non-field-upgradable. Ideally, I need some insight and advi...

I am looking for an experienced freelancer to develop custom firmware for a specific DMA card model, PCILeech (CaptainDMA). The firmware needs to be compatible with EAC, BE, Faceit, and Vanguard anti-cheats. (Vanguard most importantly) Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, specifically PCILeech (CaptainDMA). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your pr...

I am seeking a proficient programmer experienced in developing DMA Firmware with full emulation. The project will demand specific features and capabilities, including: - Undectable by all common anti cheats (EAC, BE, Vanguard) - if possible undetecable by FaceIT The firmware will be specifically designed for the Captain DMA 5th Gen 35t, hence expertise in this area is highly desirable. The ideal candidate doesn't necessarily need to be skilled in a specific programming language, but overall firmware programming experience is must. Looking forward to receiving your proposals!

Hi PULPiT DMA, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

For M1 Branding Change: The template offers user-end change, but in the Admin panel, the logo needs to be changed. The color code of the site needs to be changed. Remove license code: Site is required to work with a license code, remove that validation Full documentation about your changes. We will provide you the logo, site colors etc..

Hi Netra N., I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I am looking for Fully emulated firmware for DMA 35t chipset card (with support for EAC / BE / VGK )

DO NOT OFFER IF YOU HAVE NO FLING CLUE WHAT I AM ASKING FOR, OFFER IF YOU DONT KNOW YOU WILL BE REPORTED. READ READ READ I am looking for someone with experience in making framework for 75t dma boards to bypass vanguard / antic for valorant,

Hi PULPiT DMA, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

I am in need of experienced C coding services for a project invol...expertise in C coding. I have a stm32 discovery board(STMF407G_DISC1) and SIMCOM A7670 I need to make the functional code so that the micro does the following: configure the GSM card with AT commands, create a TCPIP server socket and another TCPIP client socket and send some information for test it, detect when the GSM module is disconnected and reconnect it again. In this project, interrupt or DMA methods must be used so that the microprocessor can do more tasks in parallel. I will choose a freelancer for this project who has an STM32 development board and a SIMCOM GSM module. The tests have to be carried out on my PC with my development board. Please contact me if you have any further questions about the project. ...

I need to interface a DAQ / IEPE ADS127L01 with STM32H753. The DAQ has a SPI output at 24 bits & 500Ks/secs. No processing is required within STM32. Only, Data from SPI-Peripheral to Buffer to Peripheral (OUT) is required / DMA. The out DATA needs to be in ETHERNET Protocol. Finally, this data on Ethernet Protocol should be tied to MATLAB for FFT.

Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. - The emulated firmware can be from a sound card, a wifi card... i am open to suggestions Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, specifically PCILeech (Lambdaconcept). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your proposal with relevant examples of previous work.

I have a pre-existing STM32 board (STM32H750VBTx) that requires a skilled freelancer to complete a time-sensitive project. The tasks include reading data from 6 ADC channels (DMA), transmitting it over UART, and implementing a basic Proportional-Integral algorithm to control the DC output. I will be present to explain the hardware setup and provide assistance throughout the project. Proficiency in STM32 programming, ADC, UART communication, and basic control algorithms is required. This is a straightforward task for an experienced STM32 developer, and immediate availability is essential. If interested, please bid on the project, and let's get started.

I am looking for an Embedded C Software Developer to assist me in starting a new enterprise. The project has a flexible timeline of 1-2 months and requires the development of software with basic (simple) functions. Please enter audio123 code in your proposal to...a new enterprise. The project has a flexible timeline of 1-2 months and requires the development of software with basic (simple) functions. Please enter audio123 code in your proposal to be considered. Skills and Experience: - Proficiency in Embedded C programming - Understanding of STM32F4 processor, XMOS processor is nice to have. - Understanding of SPI, I2C serial buses - Understanding of DMA - Eclipse and STM32 CUBE environments - Access to STM32F429I-DISC1 evaluation board - Access to oscilloscope and/or SPI signa...

I am looking for a skilled firmware developer to create a private DMA firmware for embedded devices with a focus on security and physical security measures. The ideal candidate should have experience in developing firmware for embedded devices and implementing physical security measures. Key requirements for the project include: - Developing a firmware that prioritizes physical security measures to ensure the safety of the device. - Implementing measures to prevent unauthorized access and tampering with the firmware. - Creating a secure boot process to protect against unauthorized firmware updates. - Integrating data encryption to ensure the confidentiality of data transmitted by the device. If you have experience in firmware development for embedded devices and expertise in imp...

Simple Firmware for the following Receive data in uart, encrypt and Transmit in RF Receive data in RF, decrypt and transmit in uart Use interrupt and DMA mode

Hi PULPiT DMA, I noticed your profile and would like to offer you my project. We can discuss any details over chat.

...process. The AOB is "64 69 72 65 63 74 6C 6F 67 69 6E 00 00 00 00" Skills and Experience Required: - Strong proficiency in C# programming language - Experience with byte scanning and memory manipulation - Familiarity with the rs2client process and its memory structure - Knowledge of Direct Memory Access (DMA) for implementing the byte scanning Project Requirements: - Develop a C# program that scans for specific data (Varps) within the rs2client process - Utilize Direct Memory Access (DMA) for efficient byte scanning - Provide assistance in determining the memory addresses or patterns to look for - Ensure the program is compatible with the .NET Framework - Install RuneScape game If you have experience in C# programming, byte scanning, and direct memory acces...

we need to integrate a VCU unit into out project to use the HARD H264 encoder on a KRIA SOM. the PL side should be straightforward, the Linux driver shall be integrated and a basic test shall be performed. the test shall be: configure the encoder, send via DMA a test video (could be generated with FFMPEG), save the coded video in a .h264 file which might then be post processed outside of the module a reference design with Petalinux and the board BSP will be shared and the VCU encoder shall be integrated and tested on that design

What is the target device for the custom firmware? DMA FPGA XILINIX 7 FPGA / XC7K325T FPGA high-performance chips I am looking for an experienced freelancer to develop custom firmware for a specific DMA card model, PCILeech (Terminator Z1 specifically) + other squirrel PCILeech cards. The firmware needs to be compatible with EAC, BE, Faceit, and Vanguard anti-cheats. It has to be able to disguise my DMA device exactly like another device with the same config space and return the same buffers as the second device we are trying to emulate, basically I need it to act and look exactly like another PCIe device. Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purpo...

I need help with developing a code which lets me control a specific LED matrix using ESP32 (arduino core on Platformio). Ideally it should use ESP32's DMA capabilites so the processor is free to handle other tasks efficiently like in this library (). The panel uses MBI5153 drivers on a 78x78 rgb display. Will share more information if you are interested.

FPGA Dma board Custom Firmware Im looking to get a firmware for my dma card that bypasses all anti cheats and is fully emulated. Details: Artix 7 fpga dma card Example (link):

FPGA Dma board Custom Firmware Im looking to get a firmware for my dma card that bypasses all anti cheats and is fully emulated. Details: Artix 7 fpga dma card Example (link):

I am looking for an experienced freelancer to develop custom firmware for a specific DMA card model, PCILeech (CaptainDMA). The firmware needs to be compatible with EAC, BE, Faceit, and Vanguard anti-cheats. Requirements and Features: - I am open to suggestions for specific requirements and features for the firmware. - The firmware should be optimized for gaming purposes. Ideal Skills and Experience: - Strong knowledge and experience in developing custom firmware for DMA cards, specifically PCILeech (CaptainDMA). - Familiarity with EAC, BE, Faceit, and Vanguard anti-cheats. - Understanding of gaming requirements and optimizations for firmware development. If you have the skills and experience required for this project, please submit your proposal with relevant examples of...

Simple Firmware for the following Receive data in uart, encrypt and Transmit in RF Receive data in RF, decrypt and transmit in uart Use interrupt and DMA mode

design of a VHDL synthesizable module to implement data exchange between firmware and software on a KRIA SOM module

I am looking for a skilled developer to create a Desktop Middleware Application (DMA) for ZATCA E-Invoice. The primary purpose of this DMA is to facilitate the seamless handling of invoice data received in either JSON or XML format from a Point of Sale (POS) system to process with the ZATCA API. If you have past experience in developing ZATCA API-based applications, please respond to this post so that I can share more details.

...konuda deneyimi olmadığı için biraz kaba bir program oldu. Kullandığımız iletişim protokollerini optimize etmek için, şu aşağıdaki konularda bize yardımcı olacak, STM Cube kullanarak STM32H7 serisi MCU programlama konusunda deneyimli birini arıyoruz: - UART protokolleri yerine driver yazarak MCU'yu PC ile direk konuşturma - DMA protokollerini düzgün bir şekilde uygulayarak ADC'den (ve illa UART kullanılacaksa UART'tan da) PC'ye veri akışını optimize etme - Arka planda DMA çalışırken main loop'un hatasız ve temiz bir şekilde dönmesi, gelen komutları okuyan protokolün (şu an UART_Recieve) üzerinde optimizasyon yapılması (şu an bazen gelen komutları kaçırabiliyor) - PC ile MCU arasında asenkron il...

I am looking for an experienced freelancer to develop a DMA Framework for me using C++ programming language. I'm not sure what specific libraries or tools should be used, so I'm open to the freelancer's recommendations. I need the project to have advanced functionality with high complexity. So if you have the skills and experience to create a robust DMA Framework of this complexity, please do get in touch with your past work and cost estimate. Thank you!

...GPU card • Interface to Device: PCIe EP device, Gen3 • EP controller type: Synopsys PCIe controller • Access type: BAR / DMA Development Environment: • PC with Windows 10 • PCIe card inserted • PC with Remote access • Power panel with Remote control Driver： * Support pcie bar mapping, DMA transfer and MSI/MSI-X interrupt * Support multiple pcie devices with specified vendor ID and device ID * Support allcate and free large physical memory block * Support pinned memory * Support driver send * Support send message efficiently from driver to user application * Provide two sets of ioctls for the user application Above is the base specifications 1）VE memory managment 2）VE dma management, transform implement 3) VE ISR process 4) VE ic...

...• Interface to Device: PCIe EP device, Gen3 • EP controller type: Synopsys PCIe controller • Access type: BAR / DMA Development Environment: • PC with Windows 10 • PCIe card inserted • PC with Remote access • Power panel with Remote control Driver： * Support pcie bar mapping, DMA transfer and MSI/MSI-X interrupt * Support multiple pcie devices with specified vendor ID and device ID * Support allcate and free large physical memory block * Support pinned memory * Support driver send * Support send message efficiently from driver to user application * Provide two sets of ioctls for the user application Above is the base specifications 1）VE memory managment 2）VE dma management, transform implement 3) VE ISR process 4) V...

Project Description: Payment Gateway Integration I am looking for a developer who can integrate the pawaPay payment gateway into my DMA Softlab Radius Manager platform. The integration needs to be completed within a week. Requirements: - Experience in integrating payment gateways, specifically pawaPay - In-depth knowledge of DMA Softlab Radius Manager platform - Ability to complete the integration within a tight timeframe

I am looking for a freelancer to create an SPI communications link...Communicate 2 MCU using SPI. • Transfer binary data with polling system from a master core. • Messages do not have constant length. Requirements • Master Core STM32F407 with 2 independent SPIs • Slaves Cores: o STM32F103RCT6: SPI1 o STM32F103CBT6: SPI2 • Integrable with our own communication protocol. o Header o Message o Software CRC • Byte by Byte transmission. • Code developed using HAL Libraries with DMA in TX and RX channels. • Up to 5 pins SPI communication: o NSS o CLK o MOSI o MISO o Slave Interrupt pin output. Now we are using this to know if the slave can receive data or if it's performing any other operations. • The software must be in an independent libr...

I am looking for a freelancer who is experienced in MPLAB using Microchip Harmony v3 framework. The freelancer needs to create a new project in MPLAB for PIC32MZ, i´m using this board: so is good if the freelancer owns this board. MCU: PIC32MZ2048EFH144 PHY: LAN8740 The project must: - Assign IP to the etherne...The freelancer needs to create a new project in MPLAB for PIC32MZ, i´m using this board: so is good if the freelancer owns this board. MCU: PIC32MZ2048EFH144 PHY: LAN8740 The project must: - Assign IP to the ethernet; - Respond to PING commands; - Receive 1000 bytes on UDP port 9000; - Send these 1000 bytes on SPI1 using DMA.

Job Summary: As a DMA (District Metered Area) Designer for the Water Project, you will play a vital role in designing and optimizing the distribution network for water supply within a designated district. You will be responsible for developing and implementing strategies to enhance the efficiency, reliability, and sustainability of water distribution systems. Your expertise will contribute to improving water management, reducing water loss, and ensuring optimal water supply to customers. Key Responsibilities: Conduct a comprehensive analysis of existing water distribution networks and identify potential areas for creating District Metered Areas. Design and develop DMA schemes, taking into consideration water demand patterns, geographical constraints, and existing infrastruc...

Looking for UART driver based on DMA for RPI4. We need high speed reading.

I am looking for a freelancer to create an SPI communications link...Communicate 2 MCU using SPI. • Transfer binary data with polling system from a master core. • Messages do not have constant length. Requirements • Master Core STM32F407 with 2 independent SPIs • Slaves Cores: o STM32F103RCT6: SPI1 o STM32F103CBT6: SPI2 • Integrable with our own communication protocol. o Header o Message o Software CRC • Byte by Byte transmission. • Code developed using HAL Libraries with DMA in TX and RX channels. • Up to 5 pins SPI communication: o NSS o CLK o MOSI o MISO o Slave Interrupt pin output. Now we are using this to know if the slave can receive data or if it's performing any other operations. • The software must be in an independent libr...

Hi Muhammad M., I'm hiring you for STM32 project that includes: - STM32G070RB initialization with cube mx - STM32G070RB configuration - UART & DMA configuration - UART transmission and reception with "busy flag" security - High level and low level library creation (.c and .h) - TEST with a breakout board

I am looking for a freelancer to help us integrate DMA Radius, Quickbooks, and Netcash. Specifically, we need the invoices to sync on a regularly scheduled basis, occurring once per month. We need help setting this up so that all three systems are integrated seamlessly and correctly, allowing us to have accurate and reliable data in the future. This integration should be made quickly and efficiently so that our operations are not disrupted. The right person for the job should have experience with all three systems and be able to build a process that works over the long-term. We also would like the integration to allow you to only work off one system instead of multiple e.g. we should process data on DMA Radius and it should load that same data in Quickbooks and Netcash.

Project Title: DMA Coaching Project Description: - I am seeking a DMA coach to assist me in gaining a basic understanding of DMA techniques and principles - My primary goal from this coaching is to gain a basic understanding of DMA concepts and how to apply them in my projects. - The ideal candidate should have expertise in DMA coaching and be able to provide clear and concise guidance on DMA strategies and techniques. - Strong communication skills and the ability to explain complex concepts in a simple and understandable manner are essential. - The coach should be patient, supportive, and able to adapt their teaching style to accommodate a beginner with some knowledge in related fields. - Experience in the digital marketing industry and a proven ...