Meteor routermunkák

...example) to route them to different places. For example, if the /24 is announced at provider A on router A, I want router B to be able to connect to router A and router A internally route a smaller /29 over so it is usable on router B machine (e.g. proxmox virtual machines) - BFD setup so that if any of the providers that are announcing the IPs publicly have network issues, the announcement drops so there is no blackhole of traffic Theoretically I will have the following: - 3 routers where IP space is announced publicly - 2-3 routers where I wish to use smaller blocks of said IP space, but the routers do NOT have the ability to announce publicly so it should route from another announcing router Obviously, with announcing the same IP space at ...

I'm seeking an experienced freelancer to construct a swap program on the Polygon blockchain using Python. The core feature is: - Token Swapping MATIC/ABC token on Uniswap - Use Uniswap Universal Router suppoting V3 version. - Buy(purchasing abc with matic), sell (matic with abc). The code is to check the balances of matic and abc token in metamask's personal wallet before and after buy (or sell). - Monitored and recorded on polygon scanner after the action. - GUI, no site required. Only python code. - Python version should be , Web3 version is recommended as 5.29.0. I'm in need of a developer who is proficient in Polygon blockchain technology, Python programming, and who is well-versed in cryptocurrency transactions. The ideal candidate would have prior ex...

...Transport Layer - Chapter 3 from the textbook: - Please look at basic functionality of UDP and TCP, - shown in fields of their headers, basic segment structure and connection establishment. Which one is fair, which one has congestion control? >>Network layer: Data plane: Chapter 4 - Overview of the network layer - 4.1. (all subsections within this section) - What is inside of router - 4.2 with 4.2.1 - The Internet Protocol IP: IPv4, Addressing, IPv6 and more - 4.3 - Generalized forwarding and SDN Section 4.4 - Middleboxes: Section 4.5 >> Network layer: control plane: Chapter 5 - Introduction - 5.1. - Routing algorithms in Section 5.2 - Intra-AS routing in the Internet: OSPF Section 5.3 - The SDN control plane - Sec...

...We are seeking experienced software developers to create a comprehensive and secure remote access solution for home automation systems, similar to Nabu Casa. This project involves building a cloud-based intermediary service that allows users to connect to their home automation systems (specifically Home Assistant installations, referred to as "nrjhub") from external locations without requiring router configuration changes such as port forwarding. Objectives: - Develop a secure, scalable cloud service that facilitates connection from external networks to multiple nrjhub Home Assistant installations. - Implement a system that manages authentication and secure communication channels between users and their home automation systems. - Provide a user-friendly interface ...

I'm in need of a skilled technician to update the firmware on my Checkpoint 1430 router. The requested firmware version is and due to the router being an End of Life (EOL) model purchased used, traditional download options are not available. The upgrade process will need to be executed offline. The key aim of this project is to: - Carry out the upgrade strictly offline - Ensure no loss of current functionality - Improve stability and fix any existing bugs if you could download and send me the file it would me great

We are an ISP, we want to provide Managed, filtered content to subscribers via Netgate. The BGP is done in another router. This router will do Filtering and PPPoE for the Customers. The router has a RAM of 32GB, and an ILL Backbone of 5 GIG. We want to deliver different types of managed content for schools, Companies, Hotels. We want to implement pfblocker-ng or similar technology ref: We want different PPPoE users to filter different contents. The PPPoE traffic must also be captured in the Syslog server. We also accept the requirement to be fulfilled by any other OpenSource software similar to PFsence that can be installed in NetGate server. The configuration setup must be done in AnyDesk.

...weekly or at increments of 7 GB weekly / 30 GB monthly. It can be done with external cron script. - Management of devices - system should authorise remote devices (NAS) responsible for user authorisation on remote locations. And it should not be linked to remote device IP, as it may be floating. - Setup role for user who will manage vouchers/accounts and see statistics - Configure 1 Fortigate router (40F/60F) to operate with installed system and show how it works Ideal Skills and Experience: - Proficient in Linux system administration - Proven experience in setting up radius / daloradius, radiusdesk etc. - An understanding of data limit configurations - Knowledge of Fortigate devices, experience in radius configuration on it If you meet these qualifications, I welcome your b...

I am seeking for an experienced network engineer capable of setting up a Client-to-Site VPN on a Mikrotik router. The successful configuration needs to comply with the following: - Security protocol: The VPN should be secured using the OpenVPN protocol. - Client Devices: The VPN configuration should allow connection from macOS devices. The ideal candidate should have demonstrated experience in: - OpenVPN and Mikrotik router configurations. - Familiarity with macOS operating systems. - Network security and VPN configuration. Looking forward for a professional who can deliver an effective and secure solution making remote work safer and more efficient.

I am seeking a skilled network administrator to help me with a specific firewall configuration on my Asus Dr 68-R router. This configuration includes the following specific requirements: - Set up a firewall rule that blocks all incoming DNS requests except for those from the Cloudflare DNS servers. This is to ensure that my internet filtering remains effective, despite efforts by my kids to bypass it by changing their DNS servers. - Implement content filtering in the configuration to ensure that the internet access is still secure and appropriate for my children. These configurations need to be implemented at the router level, as this is where the issue is originating. The ideal candidate for this job will have: - Profound experience in working with Asus routers, particula...

I'm seeking a visionary graphic designer who can breathe uniqueness into the world of pool cues. Focusing on custom designs, your creativity will lead the way i...cues. Focusing on custom designs, your creativity will lead the way in crafting graphics that complement all types of pool cues, from straight and Sneaky Pete to three-piece cues. Skills and experience sought: - Proven graphic design prowess, specifically in the domain of product packaging design - Extensive experience in creating custom design concepts - Knowledge of post-processing on a CNC router is highly desirable - Familiarity with traditional and modern styles in pool cue graphics This project will cater directly to your innovation. Create the look and feel that will revolutionize what pool players expect f...

I'm currently facing a pervasive issue with my fiber optic Internet service. Despite the router showing green light and wifi connection, the speed is frustratingly slow. This is affecting every device connected to the router, leading to choppy video playback, and slow webpage loading. I'm not simply looking for a quick fix to the slow speed – I need a solution that will offer enduring high-speed Internet. Either a significant boost to my existing service or an entire Internet setup replacement will be considered. Either way, the end goal is faster, more reliable internet service. Applicants for this project should: - Possess strong familiarity with Fiber optic Internet setup and troubleshooting - Have outstanding problem-solving skills - Be experienced in o...

I need a topology as described: 1. Place the IP ranges for each of the segments. 2. Mark the interface colors as GREEN, RED, ORANGE, and BLUE. 3. Place the corresponding IP next to each device to be configured. 4. Configure the IPs on each of the devices according to their network segment. 5. Perform the configuration on each IP router that corresponds to it. 6. All devices, according to their configuration, should be able to see each other. 7. PC0, PC1, and Tablet must be able to see the external web server using the domain name "". 8. PC0, PC1, and Tablet must be able to see the internal web server using the domain name "". It needs to be done within in 1 hour

I'm looking for an expert to troubleshoot my Fortigate 60F configuration. The router is currently not responding to ping and isn't receiving RADIUS accounting data from an external, hosted RADIUS server with custom ports. I'm able to access the Fortigate 60F via its web interface, and it's connected through AnyDesk. I assure you that there have been no recent changes made to the network configuration. Key Tasks include: - Understand and fix the root cause making the router not respond to ping - Determine why the router isn't receiving RADIUS accounting data from our RADIUS server and rectify it The ideal freelancer for this project should possess: - Profound knowledge and experience in networking - Hands-on experience with Fortigate - Fami...

I'm seeking a seasoned virtualization expert to configure KVM and VXLAN with a principal goal of elevating network security levels. Your responsibility will include ensuring the safety of virtual machines running databases and web servers. Key Tasks: - Set up and manage network configuration for KVM virtual machines - Integrate VXLAN for vir...other vxlan's. Ideal skills for the task: - In-depth knowledge of both KVM and VXLAN (openvswitch or alternatives) - Proficiency in configuring linux network and bridging. Environment: - KVM virtualisation (command line only, not UI) - Ubuntu 22.04 os - Baremetal servers have enough resources (AMD Epyc, minimum 32GB RAM) - Baremetal server each has 1 public network interface to gateway/public router and 1 private network interfa...

...(Ceiba). Calidad Transporte Suministros Bodega Ceiba Todos estos servicios tienen que estar centralizados en un solo edificio. Servidor DHCP. Servidor DNS (por cada departamento) Servidor de Internet de las Cosas. Los edificios cada uno con sus propias subredes (VLAN) y número de máquinas (usted las asigna, tendrá que usar VLSM según la cantidad de hosts asiganadas por grupo). Tiene que haber un router core por edificio y switch core por edificio. Enrutamiento dinámico por medio de OSPFv2. Las máquinas clientes tienen que recibir sus IP por medio de DHCP. Las máquinas tienen que tener Dual Stack de IPV6 con RIPv2. Adicionalmente, cada una de las ciudades tienen que contar con una Central Office y una red de celular de donde puede...

I am in need of an experienced network engineer or administrator to configure my MikroTik router to support a hotspot for 50-100 users. The main tasks you will need to handle include: - Implementing bandwidth management: It is crucial for me to ensure that my network's bandwidth is distributed fairly and efficiently. I need an expert who can set up the router to manage and allocate bandwidth effectively for all connected users. - Setting up user authentication: Security is a top priority for my hotspot. You will be required to configure the router to authenticate users before they can access the network. This authentication process should be simple and functional, ensuring that unauthorized users are denied access. The ideal candidate for this project should pos...

We need to create system to manage vouchers with traffic limits (for example 1Gb for 30 days), we will connect a Fortigate (or in some cases Mikrotik) router that will be acting like a NAS through classic udp ports 1812-1813. Router has a special vlans for users that has to be authenticated, and router shows his hotspot html page to user when he connects to the network. We need to create simple and lightweight pag for authentification with voucher and login/password pair. So user must use his code to login (or login/password for regular users). Router will authorize user using this server we need to create. Server must track user's traffic consumption and disconnect him when the amount of traffic will be consumed. Also we need an option to reset amount of t...

...that can be customized, or if you have a theme template you can build this with, that would be great. If you want to build from scratch, that’s your call. - I do have the high res images, so you won't need any time to find more images, but they will need to be resized and reduced to meet the design - Menu should be "sticky" to the top - This probably would require a mega-menu app, maybe using Meteor because one of their examples is close to the design, but would need to make sure it allows for the text under the category name. - The "hero" image is starting with a static image, although I will look for a video. - Utilize a modal when someone enters the store for a 20% off coupon for signing up - the theme should include a blog - Of course, it ne...

We need help with our Expo/React Native app, we have some pending features that we need done ASAP, maximum by Friday, we have more work to be done right after. About the app: backend is Supabase, frontend is using Expo 50, and Expo router, you have to stay within the same stack, and the app is a Social networking for coaches app, with access (mirrored) to our website which is an Ed-Tech platform what we need done on this job post: - we are having a problem with applying the reset password logic, we created the screens, emails get sent, but when the users click the link, the "code" doesn't get passed to the "set new password" screen, this code/token is required to allow the users to reset their new password, so the screens are there, the logic is there, it ju...

...libraries. Optimize application for maximum speed and scalability. Ensure all user input is validated before submitting to the back end. Collaborate with other team members and stakeholders. Requirements: Strong proficiency in JavaScript, including DOM manipulation and the JavaScript object model. Thorough understanding of Vue.js and its core principles. Experience with Vue.js workflows (Vuex, Vue Router). Familiarity with newer specifications of ECMAScript. Knowledge of front-end CSS frameworks like Bootstrap or Tailwind CSS. Familiarity with code versioning tools, such as Git. How to Apply: Interested candidates should submit a resume and a portfolio showcasing recent Vue.js projects. A cover letter detailing your experience with Vue.js development and why you're excit...

Hola, tengo un emprendimiento () y estoy buscando alguien que pueda mejorar el editor que tengo actualmente. Uso TipTap La idea es que armen un editor estilo linear/notion. Que funcione rapido, tenga buena performance y ux. El usuario tiene que no solo poder escribir y agregar titulos, negritas, subrayados, etc. Sino tambien fotos (seleccionar y drag and drop), un custom block para videos de youtube (links), custom block para tweets, code block con selector de lenguaje y highlight syntax, inline code, listas, blockquote. El editor debe devolver markdown.

...la calidad y la fiabilidad del sistema. 7. Tecnologías de colaboración y gestión de proyectos: - GitHub, Trello, y Asana para garantizar la eficiencia y la colaboración en el desarrollo del proyecto. 8. Tecnologías de análisis de datos: - TensorFlow, Keras, y Scikit-learn para mejorar la eficiencia y la productividad del sistema. 9. Tecnologías de navegación: - React Router, Vue Router, y Angular Router para mejorar la experiencia del usuario en la aplicación web. Consideraciones de Seguridad: - Implementar autenticación segura y manejo de sesiones. - Asegurar el cumplimiento de GDPR y otras regulaciones de privacidad relevantes. Despliegue y Mantenimiento: - Pruebas Rigurosas: Verif...

Looking for an experienced freelancer to setup port triggering and dynamic DNS on my D-LINK router for home network optimization. A successful candidate should: - Have a wealth of experience with D-LINK routers - Have solid knowledge in port triggering and dynamic DNS setup - Be able to provide expert consultation on optimal home network setup. Providing details about related past experiences during the application will be highly advantageous. This is a great project for network specialists seeking to exhibit their expertise in home network setup.

I'm looking for a programmer to program a Busellato Jet 3006 CNC Router - Genesis Software. Please reply ONLY if you are proficient and had knowledge with this machine. Thank you, Al

I'm currently experiencing unexpected routing issues on an OpenVPN site-to-site connection between two locations, managed by two OpnSense routers. I need an experienced network engineer to provide remote assistance and resolve these issues. Key details to consider: - The problem arose after changes to ISP WAN IP addresses on the second router. - The difficulty lies in maintaining a consistent OSPF route. - All routers involved run the same OSPF version, same OpnSense and same FRR. Relevant Skills and Experience: - OSPF routing knowledge - Familiarity with OpenVPN and OpnSense routers, OpnSense. - Ability to diagnose and resolve VPN routing problems - Proficency in remote assistance tools and techniques.

...of a skilled systems network engineer to set up a load balancing router in my home office. -The entire setup revolves around a Wired internet connection, an optimal choice for high-speed internet access. -We have TP Link ER605 Load Balancing Router We just want to set up in a way we can use its full potential - Additionally, the network should support 11-20 devices at any given time, accommodating all my office’s device needs. - These devices will primarily be used for video conferencing. The network should, therefore be able to seamlessly handle multiple simultaneous video conferences without any lag or interruptions. Ideal candidates for this project should showcase: - Significant experience with load balancing router setup. - Familiarity with the Wir...

I'm currently seeking a professional with comprehensive Unifi experience to configure a new Unifi home setup. I have a Unifi Express and two Unifi Access Points (APs). Key Tasks: - Get the Unifi Express to work with ISP router/modem, giving integrated network across wired and wireless. = The ideal candidate will have: - Extensive experience with Unifi setups - Proficiency in LAN configuration

... and Bash to create specialized web pages. The function of these pages is primarily to update OpenWRT routers and AWS databases. Key requirements include: - Designing and developing the pages according to a specific layout I have - Expertise in HTML/CSS, Rust, AWS/Kubernetes, and Bash is a must - High level proficiency in AWS and Kubernetes deployments - Experience with OpenWRT or other router firmware is highly desirable - Excellent attention to detail and the ability to deliver a user-friendly interface Please respond with interest and availability to open the discussion, if this project aligns with your profile and capabilities. I look forward to working with a dedicated, skilled professional to achieve my project goals. Seeking an experienced web and application d...

I'm in need of a Cisco engineer with experience in setting up network infrastructure. The project includes: - Setting up infrastructure for a medium-sized business - Primarily involved in routers and switches setup The ideal candidate should have proven skills and experience in network engineering particularly in setting up routers and switches. A Cisco certification would be an added advantage.

We are looking for an experienced developer to implement a separate audio feature in BigBlueButton version 2.7, similar to the functionality available in Fairblue BBB 2.5. This feature should allow users to connect and select a translator during a conference call. Requirements: • Strong experience with BigBlueButton development • Proficiency in JavaScript and Meteor framework • Familiarity with audio processing and streaming technologies • Ability to replicate the separate audio feature from Fairblue BBB 2.5 in BigBlueButton 2.7 • Good communication skills and ability to work independently Responsibilities: • Analyze the existing separate audio implementation in Fairblue BBB 2.5 • Develop and integrate the separate audio feature into Big...

I'm dealing with an issue on my 1325 CNC router using NC studio version 5.6. My carve co-file designs aren't translating as expected to the NC studio program, potentially indicating a communication breakdown. Though I don't encounter any error messages during transfer, the router doesn't operate as expected after the carve co-file is transferred. Skills required: - Proficiency in troubleshooting CNC routers, specifically model 1325 - Familiarity with NC studio version 5.6 - Ability to diagnose and resolve communication issues between carve co-files and NC studio program - Deep understanding of CNC programming and functionality. I am uncertain about the root of the problem, so I need someone with broad troubleshooting abilities who can analyze the situa...

I am on the hunt for a seasoned Vue.js developer with expertise not just in core areas but also integration. In specific, I require support with: - Component Development - State Management - Vue Router Configuration The chief mission of the project is the creation of an interactive and engaging dynamic user interface. I'm searching for freelancers who can highlight their past experiences in similar functions. The ideal candidate would be able to showcase their ability to use Vue.js to make robust, engaging interfaces that can retain the user's attention while providing excellent performance.

I'm hunting for a talented 3D Modelling expert to create a medium detail STL model for a CNC router application using Vectric Aspire software. The project necessitates a distinct understanding of CNC machining operations and translates them into a model design. The key component for consideration would be: - Proficiency in 3D Modelling specifically involving STL designs - Experience with Vectric Aspire software - Understanding of CNC router requirements to create models that can be successfully translated into machinable parts - Flexible with revisions to ensure the model meets desired expectations The project is to design a section of architrave moulding that has a landscape of kangaroos and trees. The idea is to start off (left to right) with the animals in differen...

I'm looking for a professional to assist in setting up a site-to-site VPN connection using an OPNSense as client to Cisco Router (Server) Please note that Cisco Router is already connected what you will work on is the OPNSense. The main reason is to facilitate secure data transfer between two sites. This connection is critical for us as we prioritize our network's security. Requirements: - Expertise in OPNSense configuration - Hands-on experience in setting up VPN connections - Great understanding of network security protocols - Capability to test and verify the secure data transfer Less than 1 hour

I am looking for a specialist capable of extending my WiFi signal to reach a garden home office located more than 100 feet away from the router. There are no obstructions in the path between the home office and the main building from where the WiFi signal will originate. My main needs revolve around connecting computers to this network, so the setup must assure consistent, reliable connectivity and sufficient bandwidth for these devices. Ideal Skills & Experience include: - Knowledge and experience in setting up long-distance WiFi networks - Familiarity with equipment that maximizes signal strength over long distances - Understanding of how to provide steady and reliable connectivity specifically for computers.

I'm in need of an expert qualified in PowerMill to develop toolpaths for a 4-axis router with a swing head/spindle. The material we will be working with is wood. Ideal Skills: - good experience in PowerMill. - Knowledgeable in 4-axis routing, particularly with a swing head/spindle. - Experience working with wood as a main material. -

I'm in need of an experienced OpenWRT developer proficient with RALINK RT5350F and MT7628N Chipsets. Primary Tasks: Require changes to existing code to facilitate dial in options. Require capability to write applications in this processor Specialise in USB interface and Router Development Be able to write and make image for upload. Firmware Customization requires adding new features, particularly in integrating dial-in options. Performance Optimization is also needed to ensure the smooth operation of new and existing features. Ideal Skills and Experience: - Expertise in OpenWRT Firmware - Experience with RALINK RT5350F and MT7628N Chipsets - Proven record of successful Firmware Customization and Performance Optimization projects - Strong background in ne...

Hello, I am an undergraduate student & want you to build FYP for my final year. I want to build a user-friendly web dashboard with title/name "NetMorph - SDN Config Pro". It will take the values of required fields for cisco's router & switch configuration from the user through that dashboard & push/deploy that configuration to the particular or multiple routers & switches automatically. The goal is to remove the use of Command Line Interface (CLI) to manually write configuration commands to each of the routers & switches. For this academic project, the configuration category is limited to Hostname, IP addresses of the interface, OSPF, VLAN, HSRP, ACL, NAT. NOTE: Similar to the below picture, you are required to use GNS3 to build a tier-3 network...

Hi, i need help in setting up a home server. I have a Huawei 5G CPE Pro 2 router connecting my house to the internet. I'm trying to setup a small home server. I have setup port forwarding on the router on multiple ports to the server private ip. the i'm trying to connect the router public ip to resolve to that server. I need help in doing that. Only people with experience in this subject will be accepted

...critical performance bottleneck: the event loop metric, as measured through New Relic, has tripled in size. This increase is primarily attributed to the changes in the 14 app router. We are looking for a Performance Specialist to diagnose, address, and optimize this issue to meet our stringent performance benchmarks. Responsibilities: Conduct a thorough analysis to identify the root causes of the increased event loop size in our Node VMs post-migration. Develop and implement strategies to optimize the event loop, specifically focusing on mitigations related to the 14 app router changes. Work closely with our development team to implement performance improvements, ensuring compatibility and stability across our sites. Utilize New Relic or similar tools to monitor

...someone knowledgeable in dealing with ACT internet service providers and TP-Link routers, specifically the AC1200 model. The Problem: - I have attempted to set up port forwarding for remote access to my home server, but it is not functioning properly. Despite restarting the router, the issue persists. The Requirement: - I need a professional who can examine whether this problem is due to the router configuration, or if the ISP itself is to blame. Skills and Experience: - Sound knowledge and understanding of ISP and router configurations. - Prior experience with ACT ISP and TP-Link AC1200 model would be advantageous. - Understanding of troubleshooting network and connectivity issues. Please note, there are no other servers or gaming consoles connected to the T...

I am looking for a s...deploying configuration settings on Cisco devices. Key Objectives: - Heighten efficiency and reduce time spent on manual tasks - Improve network reliability and stability - Streamline configurations Cisco Models: The script will primarily be utilized on Cisco c2600 and c3725 models. Specific Configurations: Key automation tasks needed include: - Open Shortest Path First (OSPF) - Hot Standby Router Protocol (HSRP) - VLAN creation and segmentation - Access Control List (ACL) - Implementation of basic device settings (hostname, IP address, SSH configurations) Ideal candidates would have significant experience with Python scripting, network automation, and a deep understanding of Cisco's equipment. Familiarity with Cisco's IOS command line interface...

I'm looking for an expert to integrate TinyMCE with full font awesome features into my version 13 application. Key tasks and requir...with full font awesome features into my version 13 application. Key tasks and requirements include: - Use the updated version of TinyMCE and ensure it works seamlessly with my application. - Incorporate font awesome features including an Icon Picker, Icon Styling, and Icon Size Customization in the TinyMCE editor. - Successfully integrate TinyMCE ensuring smooth navigation with the App Router. Ideal freelancer will have solid experience with , TinyMCE and Font Awesome. Knowledge in integrating the above-mentioned technologies is a must. A keen attention to detail and consistent communication throughout the project lifecycle is expected.

I'm seeking an experienced Arduino coder to help establish ESP32 as a Wi-Fi router using the SIM A7670 4G Module. Key elements of the project include: - Developing Arduino code to utilize the ESP32 and SIM A7670 4G Module for internet connectivity. - Enabling ESP32 to provide a Wi-Fi network for multiple devices to connect. - Implementing WPA/WPA2 security protocols for enhanced network security. Ideal candidates will have experience in working with Arduino, ESP32 and 4G modules, understanding of Wi-Fi network configurations, and implementing network security protocols.

I'm looking for a skilled animator to create an engaging 2D onboarding animation for our app. This should help new users with the process of setting up our product, the Oasis Mini. Key components to include: - Power supply connection - Show that Oasis Mini is connected to the wifi router to the internet and app - App utilization A keen understanding of UI/UX will be beneficial. You will be incorporating some of our key in-app features in the animation. Skills and Experience Required: - Proficiency in 2D animation - Experience in creating app onboarding animations - Strong grasp of UI/UX principles - Familiarity with SVG format and other animation formats. Please include any relevant portfolio pieces in your application. Knowledge about our product, which you can find at

...occurred within my React/NodeJS application. The error is: Error: Can't add new command when connection is in closed state at (/var/www/html/backend/node_modules/mysql2/:22) at /var/www/html/backend/:39 at [as handle_request] (/var/www/html/backend/node_modules/express/lib/router/:5) at next (/var/www/html/backend/node_modules/express/lib/router/:13) at complete (/var/www/html/backend/node_modules/passport/lib/middleware/:13) at /var/www/html/backend/node_modules/passport/lib/middleware/:15 at pass (/var/www/html/backend/node_modules/passport/lib/:14) at (/var/www/html/backend/n

...basis from a few clients over a Wi-Fi local network, typically say 2 clients. There is no need to confirm the messages in either way. Consequently it seems that UDP is the right protocol to be used (to be confirmed by the contractor). 2. The server should also support its part of a detection mechanism that should allow the clients to automatically detect the address IP of the server (on the same router), like UPnP or even better a custom method, possibly simple but reliable. 3. All the clients that have sent a message to the server should be registered in a simple IP list. Then every message from one client should be automatically re-sent over Wi-Fi/UDP to all registered IP-s. 4. Additionally the component should implement low-level basic RX and TX interfacing over one UART a...

I'm currently facing some issues with my NowTV router and would appreciate someone knowledgeable in this domain to scrutinize the router history. It seems that there are some hitches and I am unable to identify them myself. For this job, the ideal candidate would: - Have extensive experience with routers, their historical data interpretation, and more specifically with NowTV routers. - Be able to navigate the nuances of the router's operating system as the specific one being used wasn't provided. - Have skills in detecting and resolving possible problems. When applying, please highlight your experience working with router issues, especially if you've worked with NowTV routers before. Your expertise in this field will be highly appreciated and ...

..."@animalrf/react-grid": "^1.3.10", "@animalrf/react-header-block": "^1.0.3", "@animalrf/react-icon": "^1.0.3", "@animalrf/react-table": "^1.4.7", "@animalrf/react-theme": "^1.3.9", "antd": "3.26.20", "axios": "^0.21.1", "bootstrap": "^4.5.3", "bootstrap-switch-button-react": "^1.2.0", "chalk": "^2.4.2", "chokidar": "^3.5.0", "compression": "1.7.4", "connected-react-router": "6.4.0", "cross-env": "5.2.0", "date-fns": "^2.22.1", ...

I'm looking for a skilled professional to design and implement a MySQL database system. The database cluster, mysql router, should feature: - data warehousing, Data analysis tools to interpret and present data in a meaningful way. - User management systems to organize and regulate users effectively. - Cluster management, sql router management. - Open source tool to monitor the slow query, query...effectively monitor the data base. Ideally, the system should be equipped to store an estimated 10,000 to 500,000 records. Strong experience with MySQL is imperative, alongside a working knowledge in data analysis, user management, and real-time data updating functionalities. Your portfolio demonstrating similar projects will be highly appreciated.