Microcontroller expert for design

Hello I have more than 15 years of experience in the embedded systems design and pcb design and electronics systems design So let's discuss your project in chat

Hi there, We can design your Home Automation project by designing a PCB with water level, water quality, rpm, air quality to control some components (like fans, lights, refilling water tank from reservoir). We have already done this type of home automation projects. We can also develop the Firmware for the same PCB. My name is Harjit & I'm part of larger embedded hardware and firmware development team. We have already developed many electronic products:- GPS Controlled Relay Event status using CC1310 chip Prayer Watch Wireless Alarm System Power Bank Camera slider controller Wifi home automation Bulb with remote control Curtains with remote control Automatic flush control Smart watch for hajj We will be glad to hear from you! Regards, Harjit Singh

I am an electrical engineer with many years experience building industrial systems for measurement and control using microntrollers as well as other platforms, experience in circuit design, construction and PCB design. I have worked with many types of sensors and am very familiar with the methods of communucation that may be required. As an elec engineer my work is to interface with the real world with all it's quirks and this is my passion. Please message me to discuss this further.

hello sir, how are you. I read your proposal and i am interested in this project. I am an Embedded engineer (ARM, PIC, AVR, Arduino, SOC BLE (bluetooth) chips, ZigBee, WiFi, GPS, LED, LCD display etc.) and PCB designer (Altium, KiCad, EasyEDA, Eagle, Orcad), 3D Modeling. Plz check my profile, you can show here a project in which I used an old panel for monitoring the data. I can do this project as per your requirement. I will tell you the exact cost of the project after discussion with you. I hope you will consider me for this project. I am waiting for your reply...... thanks with regards Preetpal Singh

I have more than 3 years experience in Iot,robotics and embedded systems and have good hands on both hardware and software. I have worked on many projects that are as follows: robotics projects like gesture rover,ROS based projects Raspberry pi projects with Python and C Servo motor control through touch screen panel Esp32 and esp8266 based project Arduino based projects Raspberry pi based projects Smart lock based on esp8266 Smart water management system based on esp8266 and AWS server Smart energy meter solution Smart curtain controller Iot device with bluetooth control by android application Touch screen based projects i have also worked on electric vehicle and implemented internet of things concept there too. i have my team which Can design and complete IOT based system from hardware to server setup and application development we just need your patience and my hardwork. looking forward to work with you Regards Prashant Mishra

ELECTRICAL As an electronic architect, I have been working in PCB structure/design and firmware programming field for 8+ years. Here is a portion of the encounters that I worked back. - Schematic and PCB Format is utilizing Altium Planner, Rhythm, Falcon, etc. ISE/XPS/SDK/Vivado, Altera Quartus, IceCube) - ARM, DSP, MCUs, Arduino experience. - Arm centers: ATSAM, STM32, PIC32, A13, Freescale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board PC: Raspberry Pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE, BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full understanding for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, - C/C++ Coding IDE: keil uvision, Eclipse IDE, Arduino IDE, Avr Studio. - Microprocessor / Microcontrollers: 8051, 8086, ATMEGA, AVR, ATSAM3X8E,STM32,PIC Open Source Micro controllers Platforms: Arduino Uno, Arduino Nano, Arduino Due, STM32 Nucleo board. Experience in managing all phases of electronic product manufacturing and assembly Experience in board-level Testing, Debugging, Test Reports, Test Plans. I am ready to give hardworking, reliability, flexibility & honesty. I can work with minimal supervision, communicate & give updates on the status of my work output. When you employ me, anticipated that I should enable your business to like I 'm developing it as my own. I couldn't imagine anything better than to get notification from you

hello sir.✋ I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in Electronic Engineering Design. ✔️ Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) ✔️ Python with Deep Learning, Machine Learning ✔️ Python with Data Science ✔️ A system based on development boards(Arduino, Raspberry PI, Node MCU, Bluechip, Teensy,…) ✔️ Antenna design & Analog circuit/RF communication circuit designing and simulation using Proteus, P-Spice, Tina Pro, ADS, CST, Ansys, HFSS ✔️ Bluetooth, WIFI, zigbee, LoRA ✔️ High-Speed layout using HyperLynx ✔️ PCB layout designing, providing GERBER and BOMs, 3D files using Altium, EAGLE, Kicad, EasyEDA… ✔️ Programming firmware of Microcontroller & C++ ✔️ BMS I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.

Hello friend, I'm 10 years industry experienced professional in electronics/embedded design and manufacturing industry. So, I'm confident I can deliver you a successful design for your “gem cut studio” application. If I mention my professional background little bit, I'm experienced professional (B.sc-applied science/M.Sc-applied electronics) in electronics, embedded micros and PC software programming. In electronics, used Altium, PSpice, Eagle,Easy EDA, Ki CAD and Proteus design software for circuit simulation and Multi-layer PCB designs, and implementing communications protocols like USB, serial, etc. In Embedded domain, did several projects using Arduino, ESP8266. Raspberry Pi, PIC and AVR ,STM8, STM32, cypress PSOC micros in C/C++. And also exposed to VHDL for Altera and Xilinx FPGAs too. Thanks and Regards, Niroshan R

Hi, I am a Mechatronics engineer with lots of experience in embedded systems. I have experience in electronic designs using ARM microcontrollers, Arduino, Raspberry PI and low power wireless microcontrollers such as ESP32 and LoRa. I look forward to helping you complete your project.

I have 2 years of experience and having relevant skills in the field of embedded systems and IoT as an intermediate. I have read the description of your project and need to clarify some queries regarding your project. Can I get some extra information regarding Air quality (parameters) and Rpm? Where are you going to save the data in the cloud(AWS) or local server(sd card)? Can I get a rough dimension and the shape of your device? I have to design a PCB based on your reply. I have worked on a similar project like air quality monitoring, Automatic On/OFF of water pump based on the water level and Voice-enabled home automation. Currently working on a project IoT based water flow control using electronic valves. I have used Arduino mega, node MCU, raspberry pi, Arduino ide, Eagle,c, python for completing the above mentioned projects. I have intermediate skills in Languages like C, Python, used Microcontrollers like Arduino, Raspberry Pi, Node MCU, ESP32, used Software Tools like Proteus, Eagle, Arduino IDE, VI editor, FreeCad, Packet tracer, used Communication Protocols like I2C, SPI, RS232, UART, Wi-Fi, Bluetooth, LORA, used Communication Platform like Linux and used Cloud framework like AWS. I have enough hands-on experience to complete your objective. The pricing for your project is slightly high because it depends on the quality of the sensors. I am eagerly waiting for a platform to exhibit ideas. So, for that, your project will be a requisite.

Hi Sir, I have 15 years experience in embedded firmware and hardware development and testing , I am ready to work in this task ,please let me about your requirements and details of the project. Regards Naveen

Hi, I am electronics engineer. I think you need at least a microcontroller interfacing with some sensors. I need more information about the screen/monitor whether it will connect wirelessly or directly to the microcontroller. Let's have a chat then.