Maxbotix ultrasonic sensor arduinomunkák

I require a software solution that can extract and unlock full calibration data from a sensor for further analysis. The software must have the ability to interact with the sensor via USB connection. Key Features: - should be able to fully extract the calibration data from the sensor - the tool should be user-friendly and have a clear interface - the software should have a USB connection for the sensor - the software should be able to output the data in a readable format for further analysis Ideal Skills: - Proficiency in software development - Experience in sensor calibration and data extraction - Familiarity with USB connections and software interfacing - Strong understanding of data analysis and presentation The project will require a combination of ...

I'm seeking an Arduino developer who can provide me with a simple code for the 'ESP-WROOM-32' board. My project requires configuring the Arduino to produce a specific light blinking pattern. The trigger for this action will be a warning light in my dashboard. Details: - The ESP-WROOM-32 board is my Arduino of choice. It should be programmed to perceive the status of my dashboard’s warning light. - Once the Arduino detects that the warning light is on, it must signal for another light to blink. -I want to splice into another warning light on my car instrument panel and use the power feed on that as my input signal for the arduio - I prefer the blinking pattern to constitute 5 blinks, followed by going out. -I can power the board from a 9v...

...employing appropriate sensors, embedded systems, microcontrollers storing data in cloud, LoRa WAN, SIM communication and designing intuitive user interfaces for non-technical personnel. Ideal Candidate: - Experience in the design and development of monitoring systems., industrial grade embedded system, cloud storage, LoRa communication, PCB designing, programming etc. - Extensive knowledge in sensor technology and user interface design...

...a specific focus on sensor network and penetration testing, The aim of this project is to explain the principles, intricacies, vulnerabilities, and mitigation strategies of sensor networks in cybersecurity. However, the twist here is, the information needs to be broken down to a level that non-technical decision-makers can understand. More details about time frame and milestones will be discussed in the chat window. - The freelancer should have: - Deep knowledge and understanding of cybersecurity and sensor networks. - Strong technical writing skills, with proven ability to simplify complex concepts. - Experience in communicating technical ideas to non-technical audience. - The report should include: - An easy-to-understand exploration of ...

I have a level sensor which is currently sending data to a local Wi-Fi network, accessible through a web browser using the sensor's IP. I'm seeking assistance to automate this process and have the following requirements: 1. Data Fetching: The sensor is measuring liquid levels. This specific information needs to be fetched and transferred directly to an Excel sheet. 2. Data Update Frequency: The data should refresh in the Excel sheet every minute. 3. End Goal: The collected data will be used to generate a chart in Excel. Ideal skills for this project would include extensive experience with automation, proficiency in Excel, and understanding of level sensor operations. Knowledge of networking would be a plus. Are you the right person to help me streamline t...

Hola, Buscamos a un especialista en diseño de circuitos electrónicos para diseñar varios prototipos iniciando con el desarrollo de un dispositivo de toma de huella dactilar para llevar el registro y control de asistencia con base de datos enlazada a una web. Se valorará experiencia de programación (PhP, Python, C++), y el haber trabajo con placas como Arduino, RaspBerry y SP32 Tenemos varios proyectos, en los que hay que ir trabajando (Diseño de una consola portatil para correr un video juego propio creado en RPG MAKER XP) Un saludo

I have two projects one that uses lidar sensor functionality and the other project is made for an autonomous car model, i want to integrate both Projects together to enable lidar sensor feature in my car model. to make car model have lidar sensor with another existed sensor.

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

I'm seeking a skilled Arduino developer to create a project that involves converting spoken English words into text on an LCD screen. Key Requirements: - Implement speech recognition for English - Display the recognized speech on an LCD screen, word by word Ideal Skills: - Proficiency in Arduino Uno board - Experience with speech recognition on Arduino - Ability to integrate an LCD screen - Knowledge of English language processing This project is perfect for someone who has experience with Arduino and is passionate about developing innovative solutions. Please include any relevant project experience in your bid.

...functioning correctly and managing any updates or changes to the hardware. - Client Dashboard: I require a user-friendly dashboard for my clients. The dashboard should display the data transmitted by the sensors in a clear and understandable way. The data to be displayed includes: - Temperature and humidity - Air quality indexes - Energy consumption metrics - Parameter Dements on sensor - Scalability: The platform should be able to handle a large number of clients - more than 50. It should be designed with scalability in mind to accommodate potential growth. Skills and Experience: - Proficiency in LoRaWAN technology: As the core of this project is based on LoRaWAN, the ideal candidate should have a strong understanding of this technology and experience working ...

...a specific focus on sensor network and penetration testing, The aim of this project is to explain the principles, intricacies, vulnerabilities, and mitigation strategies of sensor networks in cybersecurity. However, the twist here is, the information needs to be broken down to a level that non-technical decision-makers can understand. More details about time frame and milestones will be discussed in the chat window. - The freelancer should have: - Deep knowledge and understanding of cybersecurity and sensor networks. - Strong technical writing skills, with proven ability to simplify complex concepts. - Experience in communicating technical ideas to non-technical audience. - The report should include: - An easy-to-understand exploration of ...

I'm currently in the prototype development phase of a project that involves visualizing a game object on the Hololens 2. - I'm looking to enable Hololens 2 to visualize a...development phase of a project that involves visualizing a game object on the Hololens 2. - I'm looking to enable Hololens 2 to visualize a game object that is also running on a PC. This PC is fetching data from an Arduino via the serial port. - The Arduino is collecting continuous data from a potentiometer. The project aims for an interactive design visualization experience and I'm looking for a skilled developer to connect these different elements seamlessly. The use of Unity3D and Photon Unity Network is vital for this task. Experience with Hololens 2 development, Unity3D, Ardu...

I need an expert in Python and Arduino (C++) code. The main task is to correct the Arduino code I already have. Currently, I am sending in string containing 80 characters or so like (<4, 100, 30, 200, 15, 100, 15, 20, 10>), from Python to arduino, however arduino is receiving 0 as the values for the ending like like (<4, 100, 30, 200, 15, 100, 0, 0, 0>). In the serial monitor it does receive the correct values. Here's what the job requires: - Review and correct the current Arduino code - Arduino MUST receive the correct values sent from Python - Adequate understanding of Python as values are sent from Python - Ability to provide suggestions for improvements would be a plus Ideal skills and experience: - Strong proficiency in Py...

I'm in urgent need of an expert to help with Arduino and SNMP integration for my IoT project. Key Requirements: - Immediate Assistance: I require someone who can start work right away and assist me in getting this integration up and running as soon as possible. - Arduino Expertise: You must be well-versed in programming and working with Arduino boards. Please provide details of your experience working with Arduino and integrating SNMP for IoT in your proposal. Prior experience with remote control and configuration of Arduino devices is highly desirable.

I am seeking an Arduino programmer with specific expertise in ESP32. The nature of this project requires the development of functionalities that can enable event scheduling in the ESP32 environment. Iot will send a schedule to the device. The schedule will look something like this CO2 2% 1 hour 20 minutes, CO2 0% 2 hour 0 minute, CO2 3% 1 hour 30 minute. The code already controls the CO2 levels to that percent. The problem we are having is running the schedule. So with the CO2 level there is a setpoint. That part works fine. You give it the setpoint and it maintains that level of CO2. However we need it to change the setpoint after x amount of time has elapsed and then change the setpoint again after another x amount of time has elapsed etc...We have a real time clock on the boa...

I'm in need of an experienced IoT device developer to create a production-level device specifically tailored to calculate current flowing through a phase in a transformer. Ideally, the skill-set of the successful freelancer will include: - Experience with ESP3266 and clamp current sensor. - Expertise in the development of IoT devices that can perform real-time monitoring. - Capable of crafting a solution that concentrates specifically on current level monitoring. - Should be more efficient and accurate current flow value - AWS iot core experience will advantage - Open for suggestions for production level. This project could potentially roll into a long-term contract depending on the success of the initial task. So, if you have the skills and experience, please place your bi...

I'm looking for a proficient Arduino engineer to integrate and build a project revolving around proximity sensor integration. This project is centered around a 6 sensor counter setup. The ideal skills and experience for this job would include: -Strong knowledge in Arduino -Experience in sensor integration, specifically proximity sensors -Understanding of data logging and its applications Responsibilities will include: -Programming the Arduino to reflect sensor integration -Developing a setup to add 6 proximity sensors together into one counter -Assuring that data logging works optimally with the integrated sensors If you possess these skills and believe in delivering quality work, please submit your proposal. I look forward to work...

I am currently seeking an Arduino expert to enhance a project focused on indoor people detection. The primary objective involves refining a photoelectric sensor system. Key project requirements are as follows: 1. Specific functionality: The system must accurately detect and identify individuals within an indoor environment. 2. Sensor sensitivity: The sensors should effectively detect people while minimizing false positives caused by small, irrelevant objects. The ideal candidate for this project should possess: Extensive experience in Arduino-based development, particularly with photoelectric sensors. Proficiency in testing the system for accurate people detection and troubleshooting any potential issues. Knowledge of human body detection algorithms and s...

Help me with the software code and wiring for a Arduino. 1. turn the motor(hydraulic pump) forward and sense the currrent as it ramps up to 170mA and stops. 2. turn the motor in reverse and monitor the position sensor.

...with RFD900A device. * The send and receive will be handled simultaneously. * Received data will be displayed on screen as text, hexcode or in binary form depending on user selectable option. * Received data will be saved into a file. User shall be able to enable or disable this option. * User will be able to define the log file name. * App will transmit data typed from a keyboard (similar to Arduino terminal) or should be able to select a file to read and transmit. * User will be able configure the serial port (i.e. select com port, baud rate (1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 256000, Custom) , data bits (5, 6, 7, 8 bits), parity (None, Odd, Even, Mark, Space), stop bits (1, 1.5, 2), handshaking (None, RTS/CTS, XON/XOFF, RTC/CTS+XON/XOFF, RTS on TX) etc.) *...

I'm seeking a proficient developer with experience in Raspberry Pi Pico, USB ethernet programming, NTP (Network Time Protocol) clients, and web server development. Integrate existing open source libraries to achieve the following objective. - Project is completely hosted on a Raspberry Pi Pico board using Arduino IDE, FreeRTOS, and libraries. - Creates an Ethernet endpoint when USB is connected to a Fedora Linux host PC. - NTP client enabled to obtain accurate Global time synchronization. - Web server with a single page offered which display a "Hello World" page with current date and time, and a drop down box where the host can set the time zone. This RPI Pico web page is accessed from FireFox on the Fedora Linux host.

...SLAM system, leveraging Raspberry Pi 5, 2D Lidar and Arduino Uno/MKR 1010 WiFi as part of my college project. Key responsibilities will be to aid in motor control and visualizing real-time Lidar data. Specific requirements include: 1. Implement FastSLAM algorithm – You will need to have a thorough understanding and experience in implementing this particular SLAM algorithm. 2. Utilizing Python – All coding tasks should be performed using Python. 3. Deliver Real-time Lidar Data Visualization with: - Map Display: A real-time map should be drafted using the Lidar-scanned data. - Moving Trajectory: Display the accurate position and movement trajectory of the SLAM system. Having a background in working with Raspberry Pi and Arduino, while specializing in...

I've been experiencing issues with the Akamai 2.0 sensor data processing. The sensor data is not being processed correctly. I'm looking for a professional who can work through my full source code and fix these issues. Key Responsibilities: - Review the full source code of my system, which is built with Golang - Fix the issues related to processing the sensor data - Ensure the sensor data is collected, transmitted, and processed accurately I need someone with strong proficiency in Golang and javascript, as well as a deep understanding of sensor data processing. The ideal candidate should have experience in debugging and fixing similar issues in other systems.

I am seeking an experienced Arduino coder for my robotics project. The primary task involves coding for a robot that specializes in collecting tennis balls from the ground. Key tasks and responsibilities: - Sensor-based detection: The robot needs to be able to identify and pick up tennis balls from the ground using sensors. Your code should enable the robot to execute these functionalities efficiently. I prefer if you have: - Proven experience in coding with Arduino, especially in robotics. - Detailed knowledge and experience in sensor-based detection systems. Your role in this project is vital for the operational success of the robot. Please only bid if you're confident in your ability to meet these requirements.

I would like to hire a developer that is familiar with coding C++ on an Arduino platform. Project Description: - Control a poker game via addressable LED light strips & buttons for each player, including the dealer. I have a flow chart built for the functionality I am looking for (see attached pdf) and the effects I want to happen once certain conditions/states have been met. Hardware details: - W2812B LED Strip - Individually Addressable 16.4ft, 60 pixels/m - DC5V - AC100-240V to DC5V/30A Power Supply - Max 150W - Arduino Mega 2560 R3 - (10) Push-Button Switches I would ideally like this to be completed within the next few weeks. We can lower the complexity if that will make it more feasible / less buggy. Thank you!

...Requirements: - Utilize a crash sensor micro switch: This element is the core of the project as it's designed to respond to an impact and trigger a series of events. - Trigger a 12v motor: The motor should start running as soon as the sensor detects an impact. - Simultaneously play a short MP3 file: The audio should begin playing once the sensor is activated, but it should be less than 30 seconds in duration. - Activate a solenoid latch: This component is crucial as it performs a critical function in the project. The solenoid latch should be triggered once the motor is on and the music is playing. - Stop the music and motor: Once the solenoid latch has been activated, the MP3 player and motor should stop automatically. Ideal Skills and Experience: - P...

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

I will design arduino project for distance measuring in ultrasonic sensor

I'm looking for an experienced IoT developer who can create an Arduino-based system that triggers actions or alerts based on scraped text data from a website. Key Responsibilities: - Develop a system using Arduino, Raspberry Pi, and ESP32 microcontroller - Implement website scraping functionality to extract specific text content - Design a mechanism to trigger predefined actions or alerts based on the scraped data Ideal Experience: - Proficient in Arduino programming - Familiarity with ESP32 microcontroller and Raspberry Pi - Experience with website scraping techniques - Ability to integrate scraped data to trigger actions or alerts on an IoT system Please note that my preferred programming language wasn't specified. Feel free to suggest the most appropri...

I'm in need of an expert React developer to create a sophisticated water re...aiding in data-driven decision making. - **Automatic Irrigation System Control**: To ensure judicious water utilization, the site should feature sensor-based irrigation control. This entails automatic adjustment of irrigation schedules based on water levels detected by sensors. - **Weather Forecast Integration**: Integrate the site with a reliable weather forecast source. This will aid in planning and adjusting irrigation schedules considering the projected weather conditions. The ideal freelancer should possess solid React development skills and have previous experience working with IoT or smart agriculture technology. Familiarity with sensor-based systems and data visualization will ...

I'm searching for a proficient Arduino coder, to support in integrating dc motor driver, lcd20x4 with I2c and inductive proximity sensor into my existing project. The primary goal is to control 2 dc motor simultaneously. Key requirements for this role include: * Proficiency in Arduino coding * Vast experience with sensor integration, specifically using inductive proximity sensors * micro controller

I'm looking for a developer who can help me transfer specific data from my website to an Arduino board. Key Requirements: - I need the betting results from my site to be sent to the Arduino. - This should occur every 1 minute, making it almost real-time. The Ideal Candidate: - Should have experience in data transfer between websites and Arduino boards. - Familiarity with real-time data transfer techniques would be a plus.

I am looking for a smart POS system with automated checkouts. Which means it should have a system that automatically scans and checkout products...scans and checkout products without the need of counter. Let me explain in storyboard. Story Board 1) A person goes to a supermarket, picks his products in trolley and moves through a gate or line. So there the camera or sensor should be placed and as he passes on the next stop there should be a screen and printer where his total amount is shown in screen and the printer prints his bill automatically. And the person can pay to the total amount to cashier via cash or online and get their products home. With this system, I'd expect the person to suggest the type of sensor or camera that needs to be purchased. Would be good if...

I'm in need of an experienced Arduino programmer, with a strong background in integrating sensors and controlling motors. Key project tasks: - Integrating a motion sensor with my Arduino - Managing control of a DC motor - Setting up data logging functionality - small servo motor controlling and calibration Ideal Skills: - Proficiency in Arduino programming - Prior hands-on experience with motion sensors and DC motors - Familiarity with data logging processes is a plus! If you have the right skill set, I'd love to connect and further discuss the project details. Making a simple servo motor controlling and switching between dc motor and servo motor by and e bike throttle bar

Kérjük, regisztráljon vagy jelentkezzen be a részletek megtekintéséhez!

Kérjük, regisztráljon vagy jelentkezzen be a részletek megtekintéséhez!

...TFT display (ST7735 or similar) to the ESP32 board and display the value of the sensors on the screen with a gauge. Example: - DHT22 sensor and the ESP32 will display 2 gauges, where one will be for the Temperature and the other will be for Humidity. Similar will be for the Air Quality sensor where PMSX003 and the ESP32 will display the value on the TFT display with gauges with high refresh rate. The Shelly relays and other switches doesn't need gauges but nice looking switches to be displayed. THE REQUIRENMENT will be to write a code and create the gauges for all of the sensors I have currently attached (DHT22/DHT11, PMSX003, HC-SR501 - PIR sensor, relays and light switches as well as my Home Security which I will provide details whilst discussing the ...

I'm seeking a skilled Arduino developer for a basic level robotics project. The primary tasks for this role will include coding and troubleshooting hardware. Key requirements: - Skilled in writing Arduino code - Able to troubleshoot hardware issues - Experience in basic robotics projects The purpose of the project is to create a basic level robotics system using Arduino, which involves simple movements and operations. The ideal candidate will have a good understanding of robotics, and experience in designing circuits would be an advantage.

I require a specialist to implement a sensor data logging system using Arduino/ESP32. i Required candidate who have experties in aurdino / ESP32 and rotary encoder. Necessary Skills: - Comprehensive understanding of Arduino/ESP32 - Rotary encoder It's vital that the system be designed accurately to fulfill the need for reliable data storage. An understanding of data management and the capability to create systems for future data analysis is crucial. A background in similar projects would be greatly advantageous.

Kérjük, regisztráljon vagy jelentkezzen be a részletek megtekintéséhez!

...you were to pass the second logic test, and $50 (Fifty Dollars) if you were to pass the third logic test. ✻ OBTAINING SUPPLIES ✻ I will send you approximately $50 (Fifty Dollars) so that you can purchase ESP32 development boards, breadboards, components (such as resistors, transistors, and capacitors), wires, etc. on a site such as AliExpress, Mercado Libre, etc. The ESP32 is similar to an Arduino. I realize it may take you up to 30 (thirty) days to obtain these items. That's fine with me. However, I will * not * help you deal with corrupt local customs officials who require bribes to release goods. Any “horror stories” you might have heard or read about corrupt local customs officials in your country requiring bribes to release goods probably were for item...

Hello, For a new project I need a IOT sensor that will be installed on a device that rotates. I need to know the amount of rotations so I can service the device before it will break down. My device is not always connected to WiFi/Internet. I would like to see the amount of rotations on a remote location but I don't have to see them realtime. One update per day or per week is enough, don't know it makes a difference, but if so we can reduce the amount of data transmissions. 12V is available Pulses are count with a rotary encoder and based on the device type I have to set the pulse count per revolution. The name of the device must be adjustable so I know which IOT is connected to which device. Please let me know your thoughts. Kind regards,

BIOMETRIC MICRO-ATM FOR AEPS (AADHAAR ENABLED PAYMENT SYSTEM) Aadhaar enabled Payment System (abbreviated as AePS) - an Aadhaar dependent framework is rolled out by GOI for instigating financial inclusion in India to extend biometric & Aadhaar based banking/financial services to the citizenry through the fingerprint or iris Micro-ATMs. Incorporation...way that it offers a modern architecture blended perfectly with contemporary aesthetic. Our biometric device is absolutely suitable for the application of AePS as it is an all-in-one mobile terminal coupled with the biometric fingerprint & iris readers for efficient and accurate authentication of the customers. Furthermore, our biometric Micro-ATM deploys UIDAI/STQC approved fingerprint sensor & iris sensor with the ...

I have been developing a arduino type hmi using a nextion touch screen, arduino mega, arduino nano esp32 for wireless control and a waveshare esp32 touchscreen for the remote. I have written all the code but am needing help figuring out why the commands are not working as they should.

...in need of a talented designer who can create a custom case for a digital stop watch that will primarily be used for sports timing. Key Requirements: - The case should have an ergonomic grip, similar to that of a Seiko S141. This is crucial for comfortable handling during sports activities. - The design must be compatible with micro boards, a battery, and an OLED display. I would like to use Arduino pro micro and a small 1.5" display Ideal Skills and Experience: - Proficiency in product design and CAD software to develop the case model. - Prior experience in designing sports equipment is highly preferred, to ensure the final product meets the specific requirements for this kind of usage. - Knowledge of materials to be used in manufacturing for both durability and comfort. ...

I am in need of a skilled Arduino programmer, with experience specifically in robotics programming for educational purposes. The project has an intermediate level of complexity, so a solid understanding and the ability to problem-solve and code efficiently will be crucial. Ideal Skills: - Arduino programming - Robotics programming - Educators and student-user centered design Given the nature of the end-users, it would be highly beneficial if the freelancer also has experience in creating user-friendly interfaces and can foresee potential challenges that educators or students may face. Your technical expertise will be expected to translate into an accessible and engaging project that fits the educational context.

I'm seeking an experienced Arduino developer with a strong background in SNMP integration to assist with my IoT project. While I haven't detailed the specific tasks for the Arduino sketch, I need someone who is able to create a comprehensive program that meets the needs of my project.

I am seeking talented freelancers to develop an Arduino UNO bluetooth car for my personal hobby project. It requires expertise in Arduino programming and physical assembly of the car kit. The specific features I want are: - Directional movement: The car should smoothly move forward, backward, left, and right via remote bluetooth controls. - Speed control: The speed of the car should be adjustable. The ideal size I'm seeking for the car is medium, neither too compact nor too large. Experience with remote control vehicles and Arduino, as well as understanding of bluetooth technology, will be a plus for this project. I am looking forward to your innovative design submissions and technical solutions.

I'm looking fo...a custom embedded system. The primary functionality of this system will be sensor integration, specifically an ultrasonic sensor for animal deterrent purposes. Key Responsibilities: - Design and develop an embedded system that integrates an ultrasonic sensor for animal deterrent. - Ensure the system can effectively detect and potentially deter animals through ultrasonic sound creation. Skills and Experience: - Proven experience in designing and implementing embedded systems. - Proficiency in sensor integration, particularly with ultrasonic sensors. - Understanding of animal behavior and deterrent methods would be a plus. Please share your prior relevant experience, including successful projects involving s...

I'm in need of an experienced programmer who is well-versed in Arduino code. This project demands a particular set of skills: * Proficient in Arduino coding with a focus on device communication. * Comprehensive understanding of stepper motors functionality and their interaction with Arduino. * Ability to program Arduino to communicate and effectively control two stepper motors. The delivered coding should achieve seamless communication between Arduino and the stepper motors. Please take note of the quantity of stepper motors to control - two in this instance. Qualified bidders will be well-experienced in Arduino and stepper motors, able to discuss technical requirements with clarity, and pride themselves in delivering accurate, reliable cod...